我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Aqua blue duplex fibre patch cable with LC and ST connectors, 3.0 mm jacket

Enfain

Enfain OM3 LC-ST Duplex Multimode Fibre Optic Cable Aqua Blue

SKU CH-393B-S0F9Y

Aqua duplex patch cord with LC and ST connectors carries 10 Gbit multimode signals at 850 nm over a 3.0 mm jacket

Length 1m

  • OM3 core supports 10 gigabit multimode transmission
  • Duplex LC-ST connectors link switches and servers
  • 0 mm PVC jacket protects the fibre
  • Typical insertion loss 0.2 dB, maximum 0.3 dB
  • Return loss exceeds 38 dB for clean signals

LC-ST Duplex Multimode Patch Cable

The Enfain OM3 cable provides a 10-gigabit multimode link between equipment with LC and ST connectors. It suits data-centre, server-room or switch-to-server connections that require duplex fibre in a single assembly.

Thermals, Noise and Power Draw

Passive fibre carries no electrical current, so the cable adds no heat, no fan noise and no power draw to the rack. It operates reliably from -20 °C to +60 °C and tolerates a 330 mm bending radius during routing.

Build Integration

The 3.0 mm PVC jacket protects the duplex cores while remaining flexible enough for dense patch panels. Ceramic ferrules deliver 0.2 dB typical insertion loss and >38 dB return loss over 1000 mating cycles, freeing the installer from frequent re-termination. Not suited for single-mode runs or links beyond OM3 bandwidth limits.

商品特色

  • OM3 core supports 10 gigabit multimode transmission
  • Duplex LC-ST connectors link switches and servers
  • 0 mm PVC jacket protects the fibre
  • Typical insertion loss 0.2 dB, maximum 0.3 dB
  • Return loss exceeds 38 dB for clean signals

商品規格

本商品目前尚未公佈規格。

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I connect the LC and ST ends without exceeding the 330 mm bend radius?

Route the 3.0 mm jacket with gradual curves, securing the cable so no bend is tighter than 330 mm; the ceramic ferrules then seat cleanly in LC and ST ports.

When should I replace this patch cord after repeated mating cycles?

Plan replacement after roughly 1000 insertion and removal cycles, as performance may degrade beyond that point.

What is the maximum insertion loss I can expect on a 10 Gbps link at 850 nm?

The cable specifies a maximum insertion loss of 0.3 dB, with a typical value of 0.2 dB at 850 nm.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。