我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Aqua blue duplex multimode fibre cable with FC connectors at both ends, 3.0 mm jacket

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 3.0mm Aqua Blue

SKU CH-V7NG-MFWCK

OM3 multimode duplex cable with FC-FC connectors for 10-gigabit links at 850 nm

Length 1m

  • Supports 10 GbE links with OM3 10-gigabit core
  • Low insertion loss of 0.2 dB typical and 0.3 dB maximum
  • High return loss exceeding 38 dB for clean signals
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20 °C to +60 °C

OM3 duplex patch cable for 10G links

This Enfain OM3 multimode fibre patch cord uses FC connectors on both ends. The aqua-blue 3.0 mm PVC jacket identifies the OM3 core rated for 10-gigabit transmission at 850 nm. It suits switches, servers and data-centre patch panels that require duplex FC connections.

Ceramic ferrules and 3.0 mm jacket for daily

Duplex FC ferrules are ceramic, giving typical insertion loss of 0.2 dB and maximum 0.3 dB with return loss above 38 dB. The 3.0 mm cable withstands a 330 mm bending radius and is rated for 1000 mating cycles across an operating range of -20 °C to +60 °C.

Verify FC ports and OM3 compatibility before

Ensure both devices present FC receptacles and support OM3 multimode fibre at 850 nm. The cable is not suitable for single-mode links, LC or SC interfaces, or wavelengths outside the 850 nm window.

商品特色

  • Supports 10 GbE links with OM3 10-gigabit core
  • Low insertion loss of 0.2 dB typical and 0.3 dB maximum
  • High return loss exceeding 38 dB for clean signals
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20 °C to +60 °C

商品規格

本商品目前尚未公佈規格。

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What speeds does the OM3 duplex FC-FC cable support in practice?

The OM3 10-gigabit core is rated for 1G, 10G and 40G links at 850 nm wavelength with typical insertion loss of .2 dB and maximum of .3 dB.

What physical space is required to route the 3.0 mm jacket without damage?

The 3.0 mm PVC jacket needs a minimum bend radius of 330 mm and operates from -20 °C to +60 °C.

How do I install the ceramic ferrule connectors without exceeding the rated mating cycles?

Align the FC key, push straight in and hand-tighten the threaded coupling; each end is rated for 1000 insertion and removal cycles.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。