暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 3.0mm Aqua Blue

SKU CH-V7NG-MFWCK

OM3 multimode duplex cable with FC-FC connectors for 10-gigabit links at 850 nm

Length 1m

  • Supports 10 GbE links with OM3 10-gigabit core
  • Low insertion loss of 0.2 dB typical and 0.3 dB maximum
  • High return loss exceeding 38 dB for clean signals
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20 °C to +60 °C

OM3 duplex patch cable for 10G links

This Enfain OM3 multimode fibre patch cord uses FC connectors on both ends. The aqua-blue 3.0 mm PVC jacket identifies the OM3 core rated for 10-gigabit transmission at 850 nm. It suits switches, servers and data-centre patch panels that require duplex FC connections.

Ceramic ferrules and 3.0 mm jacket for daily

Duplex FC ferrules are ceramic, giving typical insertion loss of 0.2 dB and maximum 0.3 dB with return loss above 38 dB. The 3.0 mm cable withstands a 330 mm bending radius and is rated for 1000 mating cycles across an operating range of -20 °C to +60 °C.

Verify FC ports and OM3 compatibility before

Ensure both devices present FC receptacles and support OM3 multimode fibre at 850 nm. The cable is not suitable for single-mode links, LC or SC interfaces, or wavelengths outside the 850 nm window.

特長

  • Supports 10 GbE links with OM3 10-gigabit core
  • Low insertion loss of 0.2 dB typical and 0.3 dB maximum
  • High return loss exceeding 38 dB for clean signals
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Operates reliably from -20 °C to +60 °C

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speeds does the OM3 duplex FC-FC cable support in practice?

The OM3 10-gigabit core is rated for 1G, 10G and 40G links at 850 nm wavelength with typical insertion loss of .2 dB and maximum of .3 dB.

What physical space is required to route the 3.0 mm jacket without damage?

The 3.0 mm PVC jacket needs a minimum bend radius of 330 mm and operates from -20 °C to +60 °C.

How do I install the ceramic ferrule connectors without exceeding the rated mating cycles?

Align the FC key, push straight in and hand-tighten the threaded coupling; each end is rated for 1000 insertion and removal cycles.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。