暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Enfain

Enfain OM3 FC-FC Duplex Multimode Patch Cable 50m

SKU CH-20ZE-7V6FN

A 50 m OM3 duplex patch cable with FC connectors, 3.0 mm jacket, 850 nm wavelength, typical 0.2 dB insertion loss and >38 dB return loss

Length 50m

  • Reliable 10 Gb links with OM3 50 µm core
  • Low typical insertion loss of .2 dB for efficient signal transfer
  • High return loss above 38 dB minimises reflection
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to +60 °C

Enfain OM3 FC-FC Duplex 50m Cable

This Enfain OM3 multimode patch cable uses FC-FC duplex connectors and spans 50 metres. It is built for 10 Gigabit Ethernet links inside data centres, server rooms or campus networks. The aqua jacket identifies the OM3 grade at a glance.

Suits 10G OM3 links with FC ports

It suits installers who need a 3.0 mm PVC jacket, ceramic ferrules and OM3 bandwidth at 850 nm. Buyers who require single-mode reach, LC or SC connectors, or a different jacket rating should look elsewhere.

Insertion loss 0.2 dB typical 0.3 dB max

The typical insertion loss is 0.2 dB and the maximum is 0.3 dB, with return loss exceeding 38 dB. Those figures decide whether the cable meets your link-loss budget for 1G, 10G or 40G multimode runs.

特長

  • Reliable 10 Gb links with OM3 50 µm core
  • Low typical insertion loss of .2 dB for efficient signal transfer
  • High return loss above 38 dB minimises reflection
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to +60 °C

仕様

この商品の仕様はまだ公開されていません。

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speeds does the OM3 duplex FC-FC cable support in practice?

The OM3 core is rated for 1 Gbps, 10 Gbps and 40 Gbps Ethernet over 850 nm multimode links.

What physical space is needed to route the 3.0 mm jacket?

The cable has a 3.0 mm PVC jacket and a minimum bend radius of 330 mm, so allow that clearance behind the patch panel.

How do you seat the ceramic-ferrule FC connectors without damaging them?

Align the keyed FC plug, push straight in until the threaded collar engages, then hand-tighten only — over-torquing cracks the ceramic ferrule.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。