Enfain
Enfain OM3 LC-FC Duplex Multimode Fiber Patch Cable 10m Aqua Blue
OM3 multimode duplex patch cable with LC-FC connectors, 10 m length, 3.0 mm jacket, 850 nm wavelength, .2 dB typical insertion loss, .3 dB maximum, >38 dB return loss
- Supports 10 Gb/s links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss preserves signal strength
- Return loss above 38 dB minimises back-reflection
- 0 mm PVC jacket rated for 1000 mating cycles
- Operates from -20 °C to +60 °C in data-centre environments
10-metre OM3 duplex patch cable
This 10-metre multimode fibre patch cable uses an OM3 10-gigabit core with LC and FC connectors in a duplex arrangement. It is built for 1G, 10G and 40G links in switches, servers and data-centre equipment. The aqua-blue 3.0 mm PVC jacket protects the fibre during routing and handling.
Sustained-link performance
Typical insertion loss is .2 dB and maximum insertion loss is .3 dB, while return loss exceeds 38 dB across the 850 nm wavelength. The cable is rated for 1000 insertion and removal cycles and operates from -20 °C to +60 °C, so repeated patching and temperature swings do not degrade the signal.
Minimum bend radius decides fit
A 330 mm bending radius is the single specification that determines whether the cable can be routed inside a particular rack or tray. Installers must verify that the available bend space meets or exceeds this figure before specifying the part.
商品特色
- Supports 10 Gb/s links with OM3 10-gigabit core
- Low 0.2 dB typical insertion loss preserves signal strength
- Return loss above 38 dB minimises back-reflection
- 0 mm PVC jacket rated for 1000 mating cycles
- Operates from -20 °C to +60 °C in data-centre environments
商品規格
本商品目前尚未公佈規格。
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
商品問答
Does the 3.0 mm jacket and 330 mm bending radius let this cable run all day in a warm cabinet without overheating?
The cable is rated for -20 °C to +60 °C operating temperature, so it handles continuous use in typical rack environments without thermal issues.
What connectors must my switch and server already have for this LC-FC duplex patch cord to plug in directly?
One end needs an LC port and the other an FC port; both must accept multimode duplex fiber at the 850 nm wavelength.
Will the 0.2 dB typical insertion loss and >38 dB return loss work reliably with my older 1 Gbps and 10 Gbps OM3 gear?
Yes, the loss figures meet OM3 specs for 1 Gbps, 10 Gbps and 40 Gbps links, so legacy equipment stays compatible.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








