Enfain
Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 5m Aqua Blue
5-metre OM3 duplex multimode patch cord with FC connectors, 3.0 mm jacket and ceramic ferrules for 10 Gbit links at 850 nm
- Supports 10 Gbit links with OM3 multimode core
- Low typical insertion loss of 0.2 dB for efficient signal transfer
- High return loss exceeding 38 dB reduces reflection
- 0 mm PVC jacket protects fibres in dense racks
- Rated for 1000 mating cycles and -20 °C to 60 °C operation
Enfain OM3 FC-FC Duplex Cable
The Enfain OM3 FC-FC duplex multimode fibre optic cable is built for short-reach 10 gigabit links inside data centres and server rooms. It suits network engineers and installers who need reliable patch connections between switches, servers or patch panels using FC connectors.
Sustained 10G transmission at 850 nm
The cable carries 10G traffic over a 3.0 mm jacket with a typical insertion loss of .2 dB and a maximum of .3 dB. Return loss exceeds 38 dB, while the 330 mm bending radius and 1000 mating cycles support dense rack routing and repeated re-patching without signal degradation.
Verify FC ports and OM3 compatibility
Confirm both endpoints accept FC connectors and are specified for OM3 multimode fibre before ordering. The operating temperature range of -20 °C to +60 °C covers standard indoor environments, but outdoor or extreme-temperature installations require a different cable type.
商品特色
- Supports 10 Gbit links with OM3 multimode core
- Low typical insertion loss of 0.2 dB for efficient signal transfer
- High return loss exceeding 38 dB reduces reflection
- 0 mm PVC jacket protects fibres in dense racks
- Rated for 1000 mating cycles and -20 °C to 60 °C operation
商品規格
本商品目前尚未公佈規格。
其他版本
同系列還有 5 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
商品問答
Does the 3.0 mm PVC jacket and 330 mm bending radius make the cable stiff or hot when routed through a crowded rack all day?
The 3.0 mm jacket and 330 mm minimum bend radius are mechanical specs; the cable carries light at 850 nm and generates no heat of its own.
What connectors must my switch and server already have for this duplex FC-FC patch cord to plug straight in?
Both ends need FC sockets; the cord is duplex, so each device requires two FC ports — one for transmit and one for receive.
Will the OM3 10-gigabit core and 0.2 dB typical insertion loss work reliably with older 1 Gbit transceivers I still use?
Yes — the OM3 core is rated for 1 G, 10 G and 40 G, and the low insertion loss keeps the link budget comfortable for legacy 1 G modules.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








