Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Aqua blue duplex fibre cable with FC connectors on both ends, 3.0 mm jacket, five metres long

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 5m Aqua Blue

SKU CH-NVHR-BSQCM

5-metre OM3 duplex multimode patch cord with FC connectors, 3.0 mm jacket and ceramic ferrules for 10 Gbit links at 850 nm

Length 5m

  • Supports 10 Gbit links with OM3 multimode core
  • Low typical insertion loss of 0.2 dB for efficient signal transfer
  • High return loss exceeding 38 dB reduces reflection
  • 0 mm PVC jacket protects fibres in dense racks
  • Rated for 1000 mating cycles and -20 °C to 60 °C operation

Enfain OM3 FC-FC Duplex Cable

The Enfain OM3 FC-FC duplex multimode fibre optic cable is built for short-reach 10 gigabit links inside data centres and server rooms. It suits network engineers and installers who need reliable patch connections between switches, servers or patch panels using FC connectors.

Sustained 10G transmission at 850 nm

The cable carries 10G traffic over a 3.0 mm jacket with a typical insertion loss of .2 dB and a maximum of .3 dB. Return loss exceeds 38 dB, while the 330 mm bending radius and 1000 mating cycles support dense rack routing and repeated re-patching without signal degradation.

Verify FC ports and OM3 compatibility

Confirm both endpoints accept FC connectors and are specified for OM3 multimode fibre before ordering. The operating temperature range of -20 °C to +60 °C covers standard indoor environments, but outdoor or extreme-temperature installations require a different cable type.

Helstu kostir

  • Supports 10 Gbit links with OM3 multimode core
  • Low typical insertion loss of 0.2 dB for efficient signal transfer
  • High return loss exceeding 38 dB reduces reflection
  • 0 mm PVC jacket protects fibres in dense racks
  • Rated for 1000 mating cycles and -20 °C to 60 °C operation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the 3.0 mm PVC jacket and 330 mm bending radius make the cable stiff or hot when routed through a crowded rack all day?

The 3.0 mm jacket and 330 mm minimum bend radius are mechanical specs; the cable carries light at 850 nm and generates no heat of its own.

What connectors must my switch and server already have for this duplex FC-FC patch cord to plug straight in?

Both ends need FC sockets; the cord is duplex, so each device requires two FC ports — one for transmit and one for receive.

Will the OM3 10-gigabit core and 0.2 dB typical insertion loss work reliably with older 1 Gbit transceivers I still use?

Yes — the OM3 core is rated for 1 G, 10 G and 40 G, and the low insertion loss keeps the link budget comfortable for legacy 1 G modules.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.