Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Aqua duplex fibre patch cord with SC and ST connectors, 3.0 mm jacket, 5 m length

Enfain

Enfain OM3 SC-ST Duplex Multimode Fibre Optic Cable 5m

SKU CH-NMNS-49BH4

OM3 multimode duplex patch cable with SC and ST connectors for 10 Gb links up to 330 m, 0.2 dB typical insertion loss and 3.0 mm jacket

Length 5m

  • Reliable 10 Gb links with OM3 850 nm core
  • Low signal loss at 0.2 dB typical insertion
  • Strong return loss exceeds 38 dB for clean signals
  • Durable 3.0 mm jacket withstands 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C

Enfain OM3 SC-ST Duplex Patch Cable

This Enfain OM3 multimode fibre patch cable uses SC and ST connectors in a duplex configuration. It carries 10 gigabit signals at 850 nm wavelength through a 3.0 mm PVC jacket. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB and return loss exceeds 38 dB. The cable is rated for 1000 mating cycles and operates from -20 °C to 60 °C.

Suited for 10G data-centre links

Network engineers connecting switches, servers or patch panels that present SC on one side and ST on the other will find this cable matches the required interface. Installations needing LC, MTP or single-mode connectors cannot use this assembly. Buyers who require a different connector mix or a longer reach should look at other options.

SC-ST duplex connector pairing defines compatibility

The fixed SC and ST ends determine which ports the cable can join. No adapter is included, so both link endpoints must natively accept these connector types. Verify the port layout before ordering.

Helstu kostir

  • Reliable 10 Gb links with OM3 850 nm core
  • Low signal loss at 0.2 dB typical insertion
  • Strong return loss exceeds 38 dB for clean signals
  • Durable 3.0 mm jacket withstands 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What insertion loss can I expect on this 5 m OM3 SC-ST cable during sustained 10 Gbit traffic?

Typical insertion loss is 0.2 dB and maximum is 0.3 dB per connection at 850 nm.

Does the 3.0 mm PVC jacket or ceramic ferrule affect heat or noise when the link runs continuously?

The passive cable generates no noise or heat; operating temperature range is -20 °C to +60 °C.

Which ports must my equipment already have for this duplex patch cord to work?

One SC connector and one ST connector, both multimode, are required at each end.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.