Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Aqua duplex fibre patch cord with SC and ST connectors, 3.0 mm jacket, 5 m length

Enfain

Enfain OM3 SC-ST Duplex Multimode Fibre Optic Cable 5m

SKU CH-NMNS-49BH4

OM3 multimode duplex patch cable with SC and ST connectors for 10 Gb links up to 330 m, 0.2 dB typical insertion loss and 3.0 mm jacket

Length 5m

  • Reliable 10 Gb links with OM3 850 nm core
  • Low signal loss at 0.2 dB typical insertion
  • Strong return loss exceeds 38 dB for clean signals
  • Durable 3.0 mm jacket withstands 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C

Enfain OM3 SC-ST Duplex Patch Cable

This Enfain OM3 multimode fibre patch cable uses SC and ST connectors in a duplex configuration. It carries 10 gigabit signals at 850 nm wavelength through a 3.0 mm PVC jacket. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB and return loss exceeds 38 dB. The cable is rated for 1000 mating cycles and operates from -20 °C to 60 °C.

Suited for 10G data-centre links

Network engineers connecting switches, servers or patch panels that present SC on one side and ST on the other will find this cable matches the required interface. Installations needing LC, MTP or single-mode connectors cannot use this assembly. Buyers who require a different connector mix or a longer reach should look at other options.

SC-ST duplex connector pairing defines compatibility

The fixed SC and ST ends determine which ports the cable can join. No adapter is included, so both link endpoints must natively accept these connector types. Verify the port layout before ordering.

Puncte forte

  • Reliable 10 Gb links with OM3 850 nm core
  • Low signal loss at 0.2 dB typical insertion
  • Strong return loss exceeds 38 dB for clean signals
  • Durable 3.0 mm jacket withstands 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What insertion loss can I expect on this 5 m OM3 SC-ST cable during sustained 10 Gbit traffic?

Typical insertion loss is 0.2 dB and maximum is 0.3 dB per connection at 850 nm.

Does the 3.0 mm PVC jacket or ceramic ferrule affect heat or noise when the link runs continuously?

The passive cable generates no noise or heat; operating temperature range is -20 °C to +60 °C.

Which ports must my equipment already have for this duplex patch cord to work?

One SC connector and one ST connector, both multimode, are required at each end.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.