Enfain
Enfain OM3 SC-ST Duplex Multimode Fibre Optic Cable 5m
OM3 multimode duplex patch cable with SC and ST connectors for 10 Gb links up to 330 m, 0.2 dB typical insertion loss and 3.0 mm jacket
- Reliable 10 Gb links with OM3 850 nm core
- Low signal loss at 0.2 dB typical insertion
- Strong return loss exceeds 38 dB for clean signals
- Durable 3.0 mm jacket withstands 1000 mating cycles
- Wide operating range from -20 °C to 60 °C
Enfain OM3 SC-ST Duplex Patch Cable
This Enfain OM3 multimode fibre patch cable uses SC and ST connectors in a duplex configuration. It carries 10 gigabit signals at 850 nm wavelength through a 3.0 mm PVC jacket. Typical insertion loss is 0.2 dB with a maximum of 0.3 dB and return loss exceeds 38 dB. The cable is rated for 1000 mating cycles and operates from -20 °C to 60 °C.
Suited for 10G data-centre links
Network engineers connecting switches, servers or patch panels that present SC on one side and ST on the other will find this cable matches the required interface. Installations needing LC, MTP or single-mode connectors cannot use this assembly. Buyers who require a different connector mix or a longer reach should look at other options.
SC-ST duplex connector pairing defines compatibility
The fixed SC and ST ends determine which ports the cable can join. No adapter is included, so both link endpoints must natively accept these connector types. Verify the port layout before ordering.
أبرز المميزات
- Reliable 10 Gb links with OM3 850 nm core
- Low signal loss at 0.2 dB typical insertion
- Strong return loss exceeds 38 dB for clean signals
- Durable 3.0 mm jacket withstands 1000 mating cycles
- Wide operating range from -20 °C to 60 °C
المواصفات
لا توجد مواصفات منشورة لهذا المنتج بعد.
إصدارات أخرى من هذا الطراز
5 أخرى من الفئة نفسها
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
أسئلة حول هذا المنتج
What insertion loss can I expect on this 5 m OM3 SC-ST cable during sustained 10 Gbit traffic?
Typical insertion loss is 0.2 dB and maximum is 0.3 dB per connection at 850 nm.
Does the 3.0 mm PVC jacket or ceramic ferrule affect heat or noise when the link runs continuously?
The passive cable generates no noise or heat; operating temperature range is -20 °C to +60 °C.
Which ports must my equipment already have for this duplex patch cord to work?
One SC connector and one ST connector, both multimode, are required at each end.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








