نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable Aqua Blue 3.0mm

SKU CH-84YB-94DFE

OM3 duplex multimode patch cord with LC and FC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, >38 dB return loss

Length 1m

  • Low-loss links with typical insertion loss of .2 dB
  • High signal integrity from return loss exceeding 38 dB
  • Reliable 10 Gb performance using OM3 850 nm multimode core
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C for data-centre use

Enfain OM3 LC-FC Duplex Cable

The Enfain OM3 LC-FC duplex multimode fibre optic cable is built for 10-gigabit links between switches, servers and data-centre equipment. Its aqua blue 3.0 mm PVC jacket identifies the OM3 core at a glance. Installers who need a reliable short-range patch cord for 1 Gbit/s, 10 Gbit/s or 40 Gbit/s Ethernet will find the correct connectors and fibre grade in one assembly. Buyers who require single-mode reach or a different connector pairing cannot use this cable.

Build quality and daily handling

Ceramic ferrules on both ends deliver a typical insertion loss of .2 dB and a maximum of .3 dB, while return loss exceeds 38 dB for clean signal integrity. The 3.0 mm jacket tolerates a 330 mm bending radius, so routing through dense patch panels remains practical. Rated for 1000 mating cycles, the connectors withstand repeated moves during rack changes. The assembly operates from -20 °C to +60 °C, covering standard indoor environments.

Deciding specification

The OM3 10-gigabit multimode core operating at 850 nm is the single figure that determines compatibility; it supports 10 Gbit/s Ethernet over the distances defined by the OM3 standard. If the link budget or reach requires single-mode fibre or a higher-grade multimode core, this cable will not meet the requirement.

أبرز المميزات

  • Low-loss links with typical insertion loss of .2 dB
  • High signal integrity from return loss exceeding 38 dB
  • Reliable 10 Gb performance using OM3 850 nm multimode core
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C for data-centre use

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

What speeds does the OM3 duplex LC-FC cable support at the 850 nm wavelength?

The OM3 10-gigabit core is rated for 1G, 10G and 40G Ethernet links at 850 nm.

What is the minimum bend radius for the 3.0 mm PVC jacket?

The cable specifies a bending radius of 330 mm to avoid signal loss or fibre damage.

How do I clean the ceramic ferrules before mating the LC and FC connectors?

Use a lint-free wipe with isopropyl alcohol on each ferrule end-face, then inspect with a fibre scope before connecting.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.