Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Aqua blue duplex fibre cable with LC and FC connectors, 3.0 mm jacket

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable Aqua Blue 3.0mm

SKU CH-84YB-94DFE

OM3 duplex multimode patch cord with LC and FC connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss, >38 dB return loss

Length 1m

  • Low-loss links with typical insertion loss of .2 dB
  • High signal integrity from return loss exceeding 38 dB
  • Reliable 10 Gb performance using OM3 850 nm multimode core
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C for data-centre use

Enfain OM3 LC-FC Duplex Cable

The Enfain OM3 LC-FC duplex multimode fibre optic cable is built for 10-gigabit links between switches, servers and data-centre equipment. Its aqua blue 3.0 mm PVC jacket identifies the OM3 core at a glance. Installers who need a reliable short-range patch cord for 1 Gbit/s, 10 Gbit/s or 40 Gbit/s Ethernet will find the correct connectors and fibre grade in one assembly. Buyers who require single-mode reach or a different connector pairing cannot use this cable.

Build quality and daily handling

Ceramic ferrules on both ends deliver a typical insertion loss of .2 dB and a maximum of .3 dB, while return loss exceeds 38 dB for clean signal integrity. The 3.0 mm jacket tolerates a 330 mm bending radius, so routing through dense patch panels remains practical. Rated for 1000 mating cycles, the connectors withstand repeated moves during rack changes. The assembly operates from -20 °C to +60 °C, covering standard indoor environments.

Deciding specification

The OM3 10-gigabit multimode core operating at 850 nm is the single figure that determines compatibility; it supports 10 Gbit/s Ethernet over the distances defined by the OM3 standard. If the link budget or reach requires single-mode fibre or a higher-grade multimode core, this cable will not meet the requirement.

Puncte forte

  • Low-loss links with typical insertion loss of .2 dB
  • High signal integrity from return loss exceeding 38 dB
  • Reliable 10 Gb performance using OM3 850 nm multimode core
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to 60 °C for data-centre use

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What speeds does the OM3 duplex LC-FC cable support at the 850 nm wavelength?

The OM3 10-gigabit core is rated for 1G, 10G and 40G Ethernet links at 850 nm.

What is the minimum bend radius for the 3.0 mm PVC jacket?

The cable specifies a bending radius of 330 mm to avoid signal loss or fibre damage.

How do I clean the ceramic ferrules before mating the LC and FC connectors?

Use a lint-free wipe with isopropyl alcohol on each ferrule end-face, then inspect with a fibre scope before connecting.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.