Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Enfain

Enfain OM3 LC-ST Duplex Multimode Fibre Optic Cable 5m Aqua Blue

SKU CH-WFNM-FYVN7

OM3 duplex multimode patch cable with LC and ST connectors, 3.0 mm jacket, 850 nm wavelength, 0.2 dB typical insertion loss and >38 dB return loss for 10 Gb links

Length 5m

  • Low-loss links with typical insertion loss of .2 dB
  • High return loss exceeding 38 dB for clean signals
  • 10 Gb/s multimode bandwidth over 850 nm wavelength
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to +60 °C

OM3 duplex cable for 10 Gb links

This OM3 multimode fibre patch cord uses LC and ST ceramic ferrules in a 3.0 mm PVC jacket. It is built for 10 gigabit Ethernet over 850 nm wavelength in data-centre, server and switch environments. The aqua blue sheath identifies the OM3 grade at a glance. It suits installers who need a ready-made duplex link between transceivers with different connector types.

Connects LC and ST ports directly

The duplex construction carries transmit and receive fibres in one assembly so a single cable bridges an LC transceiver to an ST transceiver. Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB. A 330 mm minimum bend radius and 1 000 mating cycles let the cable survive rack routing and repeated re-patching without extra strain relief.

Stable loss from -20 °C to +60 °C

Operating temperature range of -20 °C to +60 °C means attenuation stays within the quoted 0.2 dB typical and 0.3 dB maximum figures across sustained load in hot aisles or cold storage rooms. Ceramic ferrules maintain alignment through thermal cycling so long-haul 10 Gb throughput does not degrade during continuous operation. Buyers who need singlemode reach or 40 Gb parallel optics must choose a different cable type.

Puncte forte

  • Low-loss links with typical insertion loss of .2 dB
  • High return loss exceeding 38 dB for clean signals
  • 10 Gb/s multimode bandwidth over 850 nm wavelength
  • Durable 3.0 mm PVC jacket rated for 1000 mating cycles
  • Wide operating range from -20 °C to +60 °C

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How far can the OM3 core reliably carry a 10 Gbps signal at 850 nm?

The OM3 10-gigabit core is designed for 10 Gbps transmission at 850 nm wavelength over multimode distances.

What are the insertion-loss figures for the LC-ST duplex connectors?

Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB per connector.

Which connector types must the switch and server already provide for this cable to plug in?

One end uses an LC duplex connector and the other end uses an ST duplex connector.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.