Fans
Fans 4184NXHMotor 120 mm 237 m3/h 24 V 11 W case fan
A 120 mm axial case fan moving 237 m³/h at 4400 rpm from a 24 V, 11 W motor
- High airflow of 237 m³/h cools dense chassis efficiently
- 24 V 11 W DC motor keeps power draw low
- 4 400 rpm axial design delivers strong static pressure
- 119 × 119 × 38 mm frame fits standard 120 mm mounts
- 100 % analog or serial speed control enables precise thermal tuning
120 mm 24 V 11 W axial case fan
The ebm-papst 4184NXHMotor is a 120 mm axial fan built for forced electronic cooling in industrial, medical and rail applications. It runs on 24 V DC, draws 11 W at 57 A and delivers 237 m³/h at 4400 rpm. The compact external-rotor design fits a 119 × 119 × 38 mm frame and supports full speed control via analog or serial interfaces.
Suits 24 V systems needing high static pressure
This fan is aimed at integrators building 24 V DC cooling for dense enclosures, drive cabinets or embedded platforms where 38 mm thickness is acceptable. Buyers whose chassis only provide 12 V fan headers or require a slimmer profile should look elsewhere because the unit needs a 24 V supply and 38 mm mounting depth.
24 V DC operating voltage
The single deciding specification is the 24 V DC input; the fan will not run on the 12 V headers found on most consumer motherboards. Verify that your system provides a 24 V DC source and can accommodate the 38 mm frame before ordering.
Βασικά χαρακτηριστικά
- High airflow of 237 m³/h cools dense chassis efficiently
- 24 V 11 W DC motor keeps power draw low
- 4 400 rpm axial design delivers strong static pressure
- 119 × 119 × 38 mm frame fits standard 120 mm mounts
- 100 % analog or serial speed control enables precise thermal tuning
Προδιαγραφές
Δεν έχουν δημοσιευτεί ακόμη προδιαγραφές για αυτό το προϊόν.
Ερωτήσεις για αυτό το προϊόν
Will the 119*119*38 mm frame and 24 V connector fit my older 120 mm case mounting points and PSU header?
The 119*119*38 mm dimensions match standard 120 mm fan holes, and the 24 V DC input connects to a compatible 24 V header or adapter; verify your PSU provides 24 V at 57 A before installing.
How can I confirm the 4184NXHMotor is running at its rated 4400 r/min after installation?
Use BIOS fan monitoring or a hardware utility to read the RPM; it should report approximately 4400 r/min when the 24 V supply is stable and the PWM or analog control is at 100 %.
Does the box include mounting screws, a 24 V power cable or a PWM control cable, or must I buy them separately?
The supplied package contains only the axial fan unit; mounting screws, a 24 V power lead and any analog or serial speed-control cable are not included and must be sourced separately.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.00051691BTC
Διαθέσιμο