Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 120 mm square axial fan 38 mm thick with black blades and frame

Fans

Fans 4184NXHMotor 120 mm 237 m3/h 24 V 11 W case fan

SKU CH-R8QQ-Q9QX4 MPN 4184NXHMotor

A 120 mm axial case fan moving 237 m³/h at 4400 rpm from a 24 V, 11 W motor

  • High airflow of 237 m³/h cools dense chassis efficiently
  • 24 V 11 W DC motor keeps power draw low
  • 4 400 rpm axial design delivers strong static pressure
  • 119 × 119 × 38 mm frame fits standard 120 mm mounts
  • 100 % analog or serial speed control enables precise thermal tuning

120 mm 24 V 11 W axial case fan

The ebm-papst 4184NXHMotor is a 120 mm axial fan built for forced electronic cooling in industrial, medical and rail applications. It runs on 24 V DC, draws 11 W at 57 A and delivers 237 m³/h at 4400 rpm. The compact external-rotor design fits a 119 × 119 × 38 mm frame and supports full speed control via analog or serial interfaces.

Suits 24 V systems needing high static pressure

This fan is aimed at integrators building 24 V DC cooling for dense enclosures, drive cabinets or embedded platforms where 38 mm thickness is acceptable. Buyers whose chassis only provide 12 V fan headers or require a slimmer profile should look elsewhere because the unit needs a 24 V supply and 38 mm mounting depth.

24 V DC operating voltage

The single deciding specification is the 24 V DC input; the fan will not run on the 12 V headers found on most consumer motherboards. Verify that your system provides a 24 V DC source and can accommodate the 38 mm frame before ordering.

Priekšrocības

  • High airflow of 237 m³/h cools dense chassis efficiently
  • 24 V 11 W DC motor keeps power draw low
  • 4 400 rpm axial design delivers strong static pressure
  • 119 × 119 × 38 mm frame fits standard 120 mm mounts
  • 100 % analog or serial speed control enables precise thermal tuning

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Will the 119*119*38 mm frame and 24 V connector fit my older 120 mm case mounting points and PSU header?

The 119*119*38 mm dimensions match standard 120 mm fan holes, and the 24 V DC input connects to a compatible 24 V header or adapter; verify your PSU provides 24 V at 57 A before installing.

How can I confirm the 4184NXHMotor is running at its rated 4400 r/min after installation?

Use BIOS fan monitoring or a hardware utility to read the RPM; it should report approximately 4400 r/min when the 24 V supply is stable and the PWM or analog control is at 100 %.

Does the box include mounting screws, a 24 V power cable or a PWM control cable, or must I buy them separately?

The supplied package contains only the axial fan unit; mounting screws, a 24 V power lead and any analog or serial speed-control cable are not included and must be sourced separately.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.