Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Black 120 mm square axial fan 38 mm thick with black blades and frame

Fans

Fans 4184NXHMotor 120 mm 237 m3/h 24 V 11 W case fan

SKU CH-R8QQ-Q9QX4 MPN 4184NXHMotor

A 120 mm axial case fan moving 237 m³/h at 4400 rpm from a 24 V, 11 W motor

  • High airflow of 237 m³/h cools dense chassis efficiently
  • 24 V 11 W DC motor keeps power draw low
  • 4 400 rpm axial design delivers strong static pressure
  • 119 × 119 × 38 mm frame fits standard 120 mm mounts
  • 100 % analog or serial speed control enables precise thermal tuning

120 mm 24 V 11 W axial case fan

The ebm-papst 4184NXHMotor is a 120 mm axial fan built for forced electronic cooling in industrial, medical and rail applications. It runs on 24 V DC, draws 11 W at 57 A and delivers 237 m³/h at 4400 rpm. The compact external-rotor design fits a 119 × 119 × 38 mm frame and supports full speed control via analog or serial interfaces.

Suits 24 V systems needing high static pressure

This fan is aimed at integrators building 24 V DC cooling for dense enclosures, drive cabinets or embedded platforms where 38 mm thickness is acceptable. Buyers whose chassis only provide 12 V fan headers or require a slimmer profile should look elsewhere because the unit needs a 24 V supply and 38 mm mounting depth.

24 V DC operating voltage

The single deciding specification is the 24 V DC input; the fan will not run on the 12 V headers found on most consumer motherboards. Verify that your system provides a 24 V DC source and can accommodate the 38 mm frame before ordering.

Høydepunkter

  • High airflow of 237 m³/h cools dense chassis efficiently
  • 24 V 11 W DC motor keeps power draw low
  • 4 400 rpm axial design delivers strong static pressure
  • 119 × 119 × 38 mm frame fits standard 120 mm mounts
  • 100 % analog or serial speed control enables precise thermal tuning

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Spørsmål om denne varen

Will the 119*119*38 mm frame and 24 V connector fit my older 120 mm case mounting points and PSU header?

The 119*119*38 mm dimensions match standard 120 mm fan holes, and the 24 V DC input connects to a compatible 24 V header or adapter; verify your PSU provides 24 V at 57 A before installing.

How can I confirm the 4184NXHMotor is running at its rated 4400 r/min after installation?

Use BIOS fan monitoring or a hardware utility to read the RPM; it should report approximately 4400 r/min when the 24 V supply is stable and the PWM or analog control is at 100 %.

Does the box include mounting screws, a 24 V power cable or a PWM control cable, or must I buy them separately?

The supplied package contains only the axial fan unit; mounting screws, a 24 V power lead and any analog or serial speed-control cable are not included and must be sourced separately.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.