BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278929BTC
Διαθέσιμο
G.SKILL
G.SKILL F3-1600C11D-8GNT 8GB (2 x 4GB) DDR3 1600 CL11 desktop RAM
8GB dual-channel DDR3 1600 kit with CL11 timing and 1.5V operation for Intel LGA1155/LGA1156 and AMD AM3/AM3+ platforms
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11-28
- Voltage1.50V
- ECCNo
- Dual-channel kit doubles bandwidth for smoother multitasking
- CL11 timing cuts latency for snappier response
- 5V operation keeps power draw low
- 1600MHz speed delivers 12.8GBps per channel throughput
- Tested on Intel LGA1155/LGA1156 and AMD AM3/AM3+ platforms
Kit composition and purpose
This G.SKILL Value kit provides 8GB of DDR3 memory in a matched pair of 4GB modules. It is rated at 1600 speed with CL11 timings of 11-11-11-28 and runs at 1.5V. The kit targets owners of older Intel LGA1155 or LGA1156 systems and AMD AM3, AM3+ or APU platforms who need a simple capacity increase.
Compatibility guidance
Builders with those listed socket types can install the modules and expect plug-and-play operation without BIOS changes. The dual-channel configuration helps bandwidth on supported boards. Systems that require registered or ECC memory cannot use this unbuffered non-ECC kit, and any platform limited to a different DDR generation will not accept the modules.
What the bundle changes
Supplying two identical modules lets the memory controller run in dual-channel mode, which can raise usable bandwidth toward the rated 12.8GBps per channel figure. Because the kit is validated as a pair, the risk of timing mismatches between sticks is removed, so the CL11 11-11-11-28 profile should apply immediately on compatible hardware.
Βασικά χαρακτηριστικά
- Dual-channel kit doubles bandwidth for smoother multitasking
- CL11 timing cuts latency for snappier response
- 5V operation keeps power draw low
- 1600MHz speed delivers 12.8GBps per channel throughput
- Tested on Intel LGA1155/LGA1156 and AMD AM3/AM3+ platforms
Προδιαγραφές
| Brand | G.SKILL |
|---|---|
| Series | Value |
| Model | F3-1600C11D-8GNT |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11-28 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/APU/AM3+ platforms Plug and play without BIOS configuration 1.5V low voltage |
| Βάρος αποστολής | 0.06 kg |
| Διαστάσεις συσκευασίας | 150 × 144 × 15 mm |
Ερωτήσεις για αυτό το προϊόν
Does my motherboard need a specific DDR3 slot to accept this 1600MHz CL11 kit?
Any standard DDR3 DIMM slot will accept the modules; the kit runs at 1.50V and uses unbuffered, non-ECC chips.
Will this dual-channel kit run at its rated 1600MHz on an older Intel LGA1156 board?
The kit is validated for LGA1155 and LGA1156 platforms and will operate at DDR3 1600 with 11-11-11-28 timings without BIOS changes.
How can I confirm the memory is running at the advertised 12.8GBps bandwidth?
Check the memory tab in CPU-Z or the BIOS SPD readout; it should show 1600MHz, CL11 and dual-channel mode active.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
