BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
G.SKILL
8GB dual-channel DDR3 1600 kit with CL11 timing and 1.5V operation for Intel LGA1155/LGA1156 and AMD AM3/AM3+ platforms
This G.SKILL Value kit provides 8GB of DDR3 memory in a matched pair of 4GB modules. It is rated at 1600 speed with CL11 timings of 11-11-11-28 and runs at 1.5V. The kit targets owners of older Intel LGA1155 or LGA1156 systems and AMD AM3, AM3+ or APU platforms who need a simple capacity increase.
Builders with those listed socket types can install the modules and expect plug-and-play operation without BIOS changes. The dual-channel configuration helps bandwidth on supported boards. Systems that require registered or ECC memory cannot use this unbuffered non-ECC kit, and any platform limited to a different DDR generation will not accept the modules.
Supplying two identical modules lets the memory controller run in dual-channel mode, which can raise usable bandwidth toward the rated 12.8GBps per channel figure. Because the kit is validated as a pair, the risk of timing mismatches between sticks is removed, so the CL11 11-11-11-28 profile should apply immediately on compatible hardware.
| Brand | G.SKILL |
|---|---|
| Series | Value |
| Model | F3-1600C11D-8GNT |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11-28 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/APU/AM3+ platforms Plug and play without BIOS configuration 1.5V low voltage |
| משקל משלוח | 0.06 kg |
| מידות האריזה | 150 × 144 × 15 mm |
Any standard DDR3 DIMM slot will accept the modules; the kit runs at 1.50V and uses unbuffered, non-ECC chips.
The kit is validated for LGA1155 and LGA1156 platforms and will operate at DDR3 1600 with 11-11-11-28 timings without BIOS changes.
Check the memory tab in CPU-Z or the BIOS SPD readout; it should show 1600MHz, CL11 and dual-channel mode active.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?