BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
G.SKILL
8GB dual-channel DDR3 1600 kit with CL11 timing and 1.5V operation for Intel LGA1155/LGA1156 and AMD AM3/AM3+ platforms
This G.SKILL Value kit provides 8GB of DDR3 memory in a matched pair of 4GB modules. It is rated at 1600 speed with CL11 timings of 11-11-11-28 and runs at 1.5V. The kit targets owners of older Intel LGA1155 or LGA1156 systems and AMD AM3, AM3+ or APU platforms who need a simple capacity increase.
Builders with those listed socket types can install the modules and expect plug-and-play operation without BIOS changes. The dual-channel configuration helps bandwidth on supported boards. Systems that require registered or ECC memory cannot use this unbuffered non-ECC kit, and any platform limited to a different DDR generation will not accept the modules.
Supplying two identical modules lets the memory controller run in dual-channel mode, which can raise usable bandwidth toward the rated 12.8GBps per channel figure. Because the kit is validated as a pair, the risk of timing mismatches between sticks is removed, so the CL11 11-11-11-28 profile should apply immediately on compatible hardware.
| Brand | G.SKILL |
|---|---|
| Series | Value |
| Model | F3-1600C11D-8GNT |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11-28 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/APU/AM3+ platforms Plug and play without BIOS configuration 1.5V low voltage |
| وزن الشحنة | 0.06 kg |
| أبعاد الطرد | 150 × 144 × 15 mm |
Any standard DDR3 DIMM slot will accept the modules; the kit runs at 1.50V and uses unbuffered, non-ECC chips.
The kit is validated for LGA1155 and LGA1156 platforms and will operate at DDR3 1600 with 11-11-11-28 timings without BIOS changes.
Check the memory tab in CPU-Z or the BIOS SPD readout; it should show 1600MHz, CL11 and dual-channel mode active.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟