Rectangular silver blade server module with front drive bays and side vents

HPE

HPE BL460c G10 Blade Server 2x Xeon Platinum 8256 32GB DDR4 2x 1.8TB SAS

SKU CH-F2VQ-ZETTN

A blade server with dual Xeon Platinum 8256 CPUs at 3.8 GHz, 32 GB DDR4, and two 1.8 TB SAS drives

TypeBlade
CPU TypeIntel Xeon
CPU Speed3.8 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB

Dual Xeon Platinum 8256 CPUs deliver 3.8 GHz processing power
32 GB DDR4 ECC memory supports demanding workloads
Two 1.8 TB SAS drives provide high-capacity storage
Smart Array P204i-b SR controller manages RAID arrays
Integrated iLO Advanced enables remote server management

19.793,99 $

0.25419602 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Blade server for dense compute clusters

The HPE BL460c G10 fits a standard blade enclosure and delivers two Xeon Platinum 8256 processors running at 3.8 GHz with four cores each and 16.5 MB cache. It targets organisations that need high single-thread performance in a shared chassis for virtualisation, database or HPC workloads. Buyers who require more than two CPU sockets or GPU acceleration should look at rack-mount alternatives.

Half-height blade with dual 2.5-inch drive bays

The half-height form factor leaves room for a second blade in the same enclosure slot while the front-accessible bays hold the two installed 1.8 TB SAS hard drives. A Smart Array P204i-b SR Gen10 controller manages RAID 0 or 1 for those drives and the FlexFabric 20 GB 2-port 650FLB adapter provides high-speed fabric connectivity. Memory expands to 128 GB across the DDR4 slots.

iLO Advanced remote management included

Integrated Lights-Out Advanced gives full out-of-band control over power, console and firmware without an operating system. Every unit ships with BIOS and firmware updated to the latest stable release after a full diagnostic burn-in. A rail kit is available on request for rack installation. Systems needing pre-loaded hypervisors or additional storage controllers must be specified at order time.

Βασικά χαρακτηριστικά

Dual Xeon Platinum 8256 CPUs deliver 3.8 GHz processing power
32 GB DDR4 ECC memory supports demanding workloads
Two 1.8 TB SAS drives provide high-capacity storage
Smart Array P204i-b SR controller manages RAID arrays
Integrated iLO Advanced enables remote server management

Προδιαγραφές

Brand	HP
Series	Proliant BL
Model	Blade
Type	Blade
CPU Type	Intel Xeon
CPU Speed	3.8 GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	32GB
Memory Type	DDR4 SDRAM
Max Memory Capacity	128GB
Hard Drive (Installed)	3,60
Storage Controller	HP Smart Array P204i-b SR Controller
HDD Interface	SAS
GPU Type	Integrated Graphics
Remote Management	Integrated Lights-Out (iLO) Advanced
Dimensions	22 x 22x 10 in
Weight	20

Ερωτήσεις για αυτό το προϊόν

What SAS interface speed does the Smart Array P204i-b SR Gen10 controller use with the 1.8TB drives?

The P204i-b SR Gen10 controller connects the two 1.8TB SAS drives at 12 Gbit/s per lane, so each drive runs at the full SAS-3 link rate.

What physical space and enclosure does the BL460c G10 blade require?

The half-height blade measures 22 x 22 x 10 inches and weighs 20 pounds; it must be installed in a supported HPE c-Class enclosure with an available half-height bay.

How is the server installed and what step is commonly missed?

Slide the blade into the enclosure bay until the latch clicks, then use iLO to update firmware and configure the Smart Array P204i-b SR controller before installing the operating system.

Επίσης σε αυτό το ράφι