We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver blade server module with front drive bays and side vents

HPE

HPE BL460c G10 Blade Server 2x Xeon Platinum 8256 32GB DDR4 2x 1.8TB SAS

SKU CH-F2VQ-ZETTN

A blade server with dual Xeon Platinum 8256 CPUs at 3.8 GHz, 32 GB DDR4, and two 1.8 TB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.8 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size32GB
  • Dual Xeon Platinum 8256 CPUs deliver 3.8 GHz processing power
  • 32 GB DDR4 ECC memory supports demanding workloads
  • Two 1.8 TB SAS drives provide high-capacity storage
  • Smart Array P204i-b SR controller manages RAID arrays
  • Integrated iLO Advanced enables remote server management

Blade server for dense compute clusters

The HPE BL460c G10 fits a standard blade enclosure and delivers two Xeon Platinum 8256 processors running at 3.8 GHz with four cores each and 16.5 MB cache. It targets organisations that need high single-thread performance in a shared chassis for virtualisation, database or HPC workloads. Buyers who require more than two CPU sockets or GPU acceleration should look at rack-mount alternatives.

Half-height blade with dual 2.5-inch drive bays

The half-height form factor leaves room for a second blade in the same enclosure slot while the front-accessible bays hold the two installed 1.8 TB SAS hard drives. A Smart Array P204i-b SR Gen10 controller manages RAID 0 or 1 for those drives and the FlexFabric 20 GB 2-port 650FLB adapter provides high-speed fabric connectivity. Memory expands to 128 GB across the DDR4 slots.

iLO Advanced remote management included

Integrated Lights-Out Advanced gives full out-of-band control over power, console and firmware without an operating system. Every unit ships with BIOS and firmware updated to the latest stable release after a full diagnostic burn-in. A rail kit is available on request for rack installation. Systems needing pre-loaded hypervisors or additional storage controllers must be specified at order time.

Highlights

  • Dual Xeon Platinum 8256 CPUs deliver 3.8 GHz processing power
  • 32 GB DDR4 ECC memory supports demanding workloads
  • Two 1.8 TB SAS drives provide high-capacity storage
  • Smart Array P204i-b SR controller manages RAID arrays
  • Integrated iLO Advanced enables remote server management

Specifications

BrandHP
SeriesProliant BL
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed3.8 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size32GB
Memory TypeDDR4 SDRAM
Max Memory Capacity128GB
Hard Drive (Installed)3,60
Storage ControllerHP Smart Array P204i-b SR Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementIntegrated Lights-Out (iLO) Advanced
Dimensions22 x 22x 10 in
Weight20

Questions about this item

What SAS interface speed does the Smart Array P204i-b SR Gen10 controller use with the 1.8TB drives?

The P204i-b SR Gen10 controller connects the two 1.8TB SAS drives at 12 Gbit/s per lane, so each drive runs at the full SAS-3 link rate.

What physical space and enclosure does the BL460c G10 blade require?

The half-height blade measures 22 x 22 x 10 inches and weighs 20 pounds; it must be installed in a supported HPE c-Class enclosure with an available half-height bay.

How is the server installed and what step is commonly missed?

Slide the blade into the enclosure bay until the latch clicks, then use iLO to update firmware and configure the Smart Array P204i-b SR controller before installing the operating system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.