Silver 1U rack server with eight 2.5 inch drive bays front panel

HPE

HPE DL360 Gen9 8SFF 2x Xeon E5-2683 v4 512GB DDR4 rack server

SKU CH-V02T-J5VSY

Dual Xeon E5-2683 v4 rack server with 512 GB DDR4, eight 2.5-inch drive bays and HPE Smart Array P440 controller

TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB

Dual Xeon E5-2683 v4 CPUs deliver 16 cores each for multi-threaded workloads
512GB DDR4 ECC memory supports large datasets and virtualisation
HPE Smart Array P440 SAS controller manages up to 8 SFF drives
Dual 500W Flex Slot power supplies provide redundancy
iLO Advanced remote management enables out-of-band control

1.831,99 $

0.02313002 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

HPE DL360 Gen9 8SFF dual Xeon server

The HPE ProLiant DL360 Gen9 is a 1U rack-mount server populated with two Intel Xeon E5-2683 v4 processors running at 2.1 GHz. It ships with 512 GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller in an eight-bay 2.5-inch chassis. The unit includes integrated graphics, dual 500 W power supplies and HPE iLO Advanced remote management.

Ideal for memory-heavy virtualisation

This configuration suits environments that need high core counts and large memory capacity within a single rack unit. Buyers who require internal storage out of the box should look elsewhere because no drives are installed. It is also not a fit for deployments that need GPU acceleration or more than two processor sockets.

512 GB DDR4 ECC registered memory installed

The server arrives with 512 GB of DDR4 ECC registered memory populated across its DIMM slots. Maximum supported capacity is 768 GB, so additional modules can be added if the workload demands more. Confirm that your application requires DDR4 ECC registered modules before ordering expansion memory.

Βασικά χαρακτηριστικά

Dual Xeon E5-2683 v4 CPUs deliver 16 cores each for multi-threaded workloads
512GB DDR4 ECC memory supports large datasets and virtualisation
HPE Smart Array P440 SAS controller manages up to 8 SFF drives
Dual 500W Flex Slot power supplies provide redundancy
iLO Advanced remote management enables out-of-band control

Προδιαγραφές

Brand	HP
Series	ProLiant
Model	Rack Mount
Type	Rack
CPU Type	Intel Xeon
CPU Speed	2.1GHz
# of Processors Installed	2
MAX Processors	2
Installed Memory Size	512GB
Memory Type	DDR4
Max Memory Capacity	768GB
Hard Drive (Installed)	4,00
Storage Controller	HPE Smart Array P440 SAS Controller
HDD Interface	SATA
GPU Type	Integrated Graphics
Remote Management	HPE iLO Advanced
Dimensions	36 x 24 x 10 in
Weight	40

Ερωτήσεις για αυτό το προϊόν

What rack rails or mounting hardware are needed to install the 36 x 24 x 10 in DL360 Gen9 chassis?

The server requires a compatible HPE rail kit for the 8SFF chassis; the kit is available on request and secures the 36 in deep unit to standard square-hole or round-hole rack posts.

Can the installed P440 SAS controller manage the existing SATA drives if I keep using older 2.5 in SATA SSDs?

Yes, the P440 supports both SAS and SATA protocols, so legacy 2.5 in SATA SSDs will be recognised and can be configured in RAID arrays alongside any new SAS drives.

How do I confirm both Xeon E5-2683 v4 processors and all 512GB DDR4 memory are active after power-on?

During POST the iLO console displays two CPUs each with 16 cores at 2.1GHz and shows 512GB total memory; iLO System Information later reports identical counts.

Επίσης σε αυτό το ράφι