HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
1 749,99 $US
0.02223226BTC
En stock
HPE
HPE DL360 Gen9 8SFF 2x Xeon E5-2683 v4 512GB DDR4 rack server
Dual Xeon E5-2683 v4 rack server with 512 GB DDR4, eight 2.5-inch drive bays and HPE Smart Array P440 controller
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.1GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size512GB
- Dual Xeon E5-2683 v4 CPUs deliver 16 cores each for multi-threaded workloads
- 512GB DDR4 ECC memory supports large datasets and virtualisation
- HPE Smart Array P440 SAS controller manages up to 8 SFF drives
- Dual 500W Flex Slot power supplies provide redundancy
- iLO Advanced remote management enables out-of-band control
HPE DL360 Gen9 8SFF dual Xeon server
The HPE ProLiant DL360 Gen9 is a 1U rack-mount server populated with two Intel Xeon E5-2683 v4 processors running at 2.1 GHz. It ships with 512 GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller in an eight-bay 2.5-inch chassis. The unit includes integrated graphics, dual 500 W power supplies and HPE iLO Advanced remote management.
Ideal for memory-heavy virtualisation
This configuration suits environments that need high core counts and large memory capacity within a single rack unit. Buyers who require internal storage out of the box should look elsewhere because no drives are installed. It is also not a fit for deployments that need GPU acceleration or more than two processor sockets.
512 GB DDR4 ECC registered memory installed
The server arrives with 512 GB of DDR4 ECC registered memory populated across its DIMM slots. Maximum supported capacity is 768 GB, so additional modules can be added if the workload demands more. Confirm that your application requires DDR4 ECC registered modules before ordering expansion memory.
Points forts
- Dual Xeon E5-2683 v4 CPUs deliver 16 cores each for multi-threaded workloads
- 512GB DDR4 ECC memory supports large datasets and virtualisation
- HPE Smart Array P440 SAS controller manages up to 8 SFF drives
- Dual 500W Flex Slot power supplies provide redundancy
- iLO Advanced remote management enables out-of-band control
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.1GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 512GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 4,00 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
What rack rails or mounting hardware are needed to install the 36 x 24 x 10 in DL360 Gen9 chassis?
The server requires a compatible HPE rail kit for the 8SFF chassis; the kit is available on request and secures the 36 in deep unit to standard square-hole or round-hole rack posts.
Can the installed P440 SAS controller manage the existing SATA drives if I keep using older 2.5 in SATA SSDs?
Yes, the P440 supports both SAS and SATA protocols, so legacy 2.5 in SATA SSDs will be recognised and can be configured in RAID arrays alongside any new SAS drives.
How do I confirm both Xeon E5-2683 v4 processors and all 512GB DDR4 memory are active after power-on?
During POST the iLO console displays two CPUs each with 16 cores at 2.1GHz and shows 512GB total memory; iLO System Information later reports identical counts.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
708,99 $US
0.00900717BTC
En stock
