We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack server with eight 2.5 inch drive bays front panel

HPE

HPE DL360 Gen9 8SFF 2x Xeon E5-2683 v4 512GB DDR4 rack server

SKU CH-V02T-J5VSY

Dual Xeon E5-2683 v4 rack server with 512 GB DDR4, eight 2.5-inch drive bays and HPE Smart Array P440 controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.1GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size512GB
  • Dual Xeon E5-2683 v4 CPUs deliver 16 cores each for multi-threaded workloads
  • 512GB DDR4 ECC memory supports large datasets and virtualisation
  • HPE Smart Array P440 SAS controller manages up to 8 SFF drives
  • Dual 500W Flex Slot power supplies provide redundancy
  • iLO Advanced remote management enables out-of-band control

HPE DL360 Gen9 8SFF dual Xeon server

The HPE ProLiant DL360 Gen9 is a 1U rack-mount server populated with two Intel Xeon E5-2683 v4 processors running at 2.1 GHz. It ships with 512 GB of DDR4 ECC registered memory and an HPE Smart Array P440 SAS controller in an eight-bay 2.5-inch chassis. The unit includes integrated graphics, dual 500 W power supplies and HPE iLO Advanced remote management.

Ideal for memory-heavy virtualisation

This configuration suits environments that need high core counts and large memory capacity within a single rack unit. Buyers who require internal storage out of the box should look elsewhere because no drives are installed. It is also not a fit for deployments that need GPU acceleration or more than two processor sockets.

512 GB DDR4 ECC registered memory installed

The server arrives with 512 GB of DDR4 ECC registered memory populated across its DIMM slots. Maximum supported capacity is 768 GB, so additional modules can be added if the workload demands more. Confirm that your application requires DDR4 ECC registered modules before ordering expansion memory.

Highlights

  • Dual Xeon E5-2683 v4 CPUs deliver 16 cores each for multi-threaded workloads
  • 512GB DDR4 ECC memory supports large datasets and virtualisation
  • HPE Smart Array P440 SAS controller manages up to 8 SFF drives
  • Dual 500W Flex Slot power supplies provide redundancy
  • iLO Advanced remote management enables out-of-band control

Specifications

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.1GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)4,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Questions about this item

What rack rails or mounting hardware are needed to install the 36 x 24 x 10 in DL360 Gen9 chassis?

The server requires a compatible HPE rail kit for the 8SFF chassis; the kit is available on request and secures the 36 in deep unit to standard square-hole or round-hole rack posts.

Can the installed P440 SAS controller manage the existing SATA drives if I keep using older 2.5 in SATA SSDs?

Yes, the P440 supports both SAS and SATA protocols, so legacy 2.5 in SATA SSDs will be recognised and can be configured in RAID arrays alongside any new SAS drives.

How do I confirm both Xeon E5-2683 v4 processors and all 512GB DDR4 memory are active after power-on?

During POST the iLO console displays two CPUs each with 16 cores at 2.1GHz and shows 512GB total memory; iLO System Information later reports identical counts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.