JONSBO C6-ITX BLACK Mini-ITX Mesh PC Case with Handle
- Mini-ITX Desktop
- Black
Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.
JONSBO
Compact Micro-ATX mesh chassis with tool-free panels, room for a 255 mm GPU, 75 mm cooler and 185 mm PSU, plus one 3.5" and two 2.5" drive bays
Options C6 White
The JONSBO C6 is a white steel case built for Micro ATX and Mini-ITX motherboards. Its all-mesh panels expose three fan positions across the front, top and bottom for unrestricted airflow. Tool-free removal of the upper cover and side panel simplifies internal access. This chassis suits builders who want a small-footprint desktop with straightforward cooling.
The case accepts one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top. CPU coolers are restricted to a maximum height of 75 mm. Power supplies must not exceed 185 mm in length. Builders who need taller coolers or longer power supplies cannot use this enclosure.
Graphics cards up to 255 mm in length will fit inside the chassis. Cards longer than this limit are not supported. The case provides one internal 3.5-inch bay and two 2.5-inch bays for storage. A bottom dust filter helps keep the interior clean.
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | White |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / ITX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 220-255mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
Άλλες εκδόσεις αυτού του μοντέλου
Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.
The chassis fits one 3.5 inch hard drive or two 2.5 inch solid-state drives in the same internal space, so choose the 3.5 inch bay for higher capacity mechanical storage or the 2.5 inch bays for faster flash drives.
Only low-profile coolers up to 75 mm tall will fit, so select a compact air cooler or an all-in-one liquid unit with a thin radiator and fan stack that stays within that height.
Any ATX power supply 185 mm or shorter will install without interfering with the drive cage or front fan mounts, while longer units would block those areas.
Επίσης σε αυτό το ράφι
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
Το νόμισμα στο οποίο πληρώνετε, και αυτό στο οποίο βλέπετε τις τιμές.
Αποστέλλεται από το πορτοφόλι σας στο ταμείο
Μόνο για προβολή — ο κατάλογος αναγράφεται σε δολάρια
Κανένα νόμισμα δεν αντιστοιχεί.
Επιλέξτε τη γλώσσα στην οποία σας μιλάει ο ιστότοπος.
Πρώτη επίσκεψη;
Έχετε ήδη λογαριασμό;
Δεν υπάρχει αυτόματη επαναφορά κωδικού: αυτό το κατάστημα δεν στέλνει e-mail, άρα δεν υπάρχει σύνδεσμος μίας χρήσης να ζητήσετε. Αφήστε τη διεύθυνση στον λογαριασμό σας και κάποιος θα την επεξεργαστεί με το χέρι.
Το αίτημα καταχωρίστηκε
Δεν θα λάβετε τίποτα στα εισερχόμενά σας — το κατάστημα δεν στέλνει κανένα e-mail. Κάποιος το διαχειρίζεται με το χέρι.
Τον θυμηθήκατε;