JONSBO
JONSBO C6 White Micro ATX Mesh PC Case
Compact Micro-ATX mesh chassis with tool-free panels, room for a 255 mm GPU, 75 mm cooler and 185 mm PSU, plus one 3.5" and two 2.5" drive bays
- TypeMicro ATX / Mini-ITX
- ColorWhite
- Case MaterialSteel
- Motherboard CompatibilityMicro ATX / ITX
- Dust FiltersBottom
- Internal 3.5" Drive Bays1
Options C6 White
- Micro ATX and Mini-ITX boards fit in a compact steel chassis
- Mesh panels on all sides with three fan positions for airflow
- Tool-free top cover and side panel open for quick access
- One 3.5" or two 2.5" drive bays with front grille removal
- Supports 220-255mm GPU, 75mm CPU cooler and 185mm PSU
Compact Micro ATX Mesh Chassis
The JONSBO C6 is a white steel case built for Micro ATX and Mini-ITX motherboards. Its all-mesh panels expose three fan positions across the front, top and bottom for unrestricted airflow. Tool-free removal of the upper cover and side panel simplifies internal access. This chassis suits builders who want a small-footprint desktop with straightforward cooling.
Cooling and Power Limits
The case accepts one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top. CPU coolers are restricted to a maximum height of 75 mm. Power supplies must not exceed 185 mm in length. Builders who need taller coolers or longer power supplies cannot use this enclosure.
Graphics Card Clearance
Graphics cards up to 255 mm in length will fit inside the chassis. Cards longer than this limit are not supported. The case provides one internal 3.5-inch bay and two 2.5-inch bays for storage. A bottom dust filter helps keep the interior clean.
Points forts
- Micro ATX and Mini-ITX boards fit in a compact steel chassis
- Mesh panels on all sides with three fan positions for airflow
- Tool-free top cover and side panel open for quick access
- One 3.5" or two 2.5" drive bays with front grille removal
- Supports 220-255mm GPU, 75mm CPU cooler and 185mm PSU
Caractéristiques
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | White |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / ITX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 220-255mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
Autres versions de ce modèle
5 de plus dans cette gamme
Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.
JONSBO
JONSBO C6-ITX BLACK Mini-ITX Mesh PC Case with Handle
- Mini-ITX Desktop
- Black
62 $US
0.00079904BTC
En stock
Questions sur cet article
Should I pick the single 3.5 inch bay or the two 2.5 inch bays for storage?
The chassis fits one 3.5 inch hard drive or two 2.5 inch solid-state drives in the same internal space, so choose the 3.5 inch bay for higher capacity mechanical storage or the 2.5 inch bays for faster flash drives.
What does the 75 mm CPU cooler limit mean when I build the system?
Only low-profile coolers up to 75 mm tall will fit, so select a compact air cooler or an all-in-one liquid unit with a thin radiator and fan stack that stays within that height.
How does the 185 mm maximum power supply length affect my PSU choice?
Any ATX power supply 185 mm or shorter will install without interfering with the drive cage or front fan mounts, while longer units would block those areas.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
274,89 $US
0.00354272BTC
En stock
Silverstone Technology
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W
324,03 $US
0.00417602BTC
En stock