JONSBO C6-ITX BLACK Mini-ITX Mesh PC Case with Handle
- Mini-ITX Desktop
- Black
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
JONSBO
Compact Micro-ATX mesh chassis with tool-free panels, room for a 255 mm GPU, 75 mm cooler and 185 mm PSU, plus one 3.5" and two 2.5" drive bays
Options C6 White
The JONSBO C6 is a white steel case built for Micro ATX and Mini-ITX motherboards. Its all-mesh panels expose three fan positions across the front, top and bottom for unrestricted airflow. Tool-free removal of the upper cover and side panel simplifies internal access. This chassis suits builders who want a small-footprint desktop with straightforward cooling.
The case accepts one 120 mm or 140 mm fan at the bottom, one 120 mm fan at the front, and one 120 mm or 140 mm fan at the top. CPU coolers are restricted to a maximum height of 75 mm. Power supplies must not exceed 185 mm in length. Builders who need taller coolers or longer power supplies cannot use this enclosure.
Graphics cards up to 255 mm in length will fit inside the chassis. Cards longer than this limit are not supported. The case provides one internal 3.5-inch bay and two 2.5-inch bays for storage. A bottom dust filter helps keep the interior clean.
| Brand | Jonsbo |
|---|---|
| Type | Micro ATX / Mini-ITX |
| Color | White |
| Case Material | Steel |
| Motherboard Compatibility | Micro ATX / ITX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Fan Options | Bottom - 1 x 120mm / Bottom - 1 x 140mm / Front - 1 x 120mm / Top - 1 x 120mm / Top - 1 x 140mm |
| Max GPU Length | 220-255mm |
| Max CPU Cooler Height | 75 mm |
| Max PSU Length | 185 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The chassis fits one 3.5 inch hard drive or two 2.5 inch solid-state drives in the same internal space, so choose the 3.5 inch bay for higher capacity mechanical storage or the 2.5 inch bays for faster flash drives.
Only low-profile coolers up to 75 mm tall will fit, so select a compact air cooler or an all-in-one liquid unit with a thin radiator and fan stack that stays within that height.
Any ATX power supply 185 mm or shorter will install without interfering with the drive cage or front fan mounts, while longer units would block those areas.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?