BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277453BTC
Διαθέσιμο
Kingston Technology Corp.
Kingston Technology Corp. KVR1333D3N9K3/3G 3GB (3 x 1GB) DDR3 1333 desktop RAM
Triple-channel kit of three 1GB DDR3 1333 CL9 modules at 1.5V for 3GB total capacity
- Capacity3GB (3 x 1GB)
- SpeedDDR3 1333 (PC3 10666)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- Triple-channel kit expands bandwidth with three matched 1GB modules
- DDR3 1333 speed delivers 10666 MT/s data rate for responsive multitasking
- CL9 latency at 1.50V keeps timing tight and power draw low
- 240-pin DIMMs with gold contacts ensure reliable slot connection
- JEDEC-standard SPD programming enables plug-and-play stability at rated frequency
Triple-channel DDR3 kit
This Kingston ValueRAM kit provides three 1 GB unbuffered DIMMs for a total of 3 GB. It is built for desktop systems that populate three memory channels simultaneously. The modules run at DDR3 1333 with a CAS latency of CL9 at 1.50 V.
DDR3 1333 bandwidth ceiling
The DDR3 1333 interface (PC3 10666) caps peak transfer rate at the JEDEC-standard 10666 MB/s per module. Real-world throughput will be lower due to protocol overhead and the CL9 timing. No higher speed grade or tighter latency is specified for these modules.
Check 240-pin DDR3 slots and voltage
Verify that the motherboard has three available 240-pin DDR3 slots and supports 1.50 V unbuffered non-ECC memory. The board must also be able to run all three channels in triple-channel mode. Systems limited to dual-channel or requiring registered DIMMs cannot use this kit as intended.
Βασικά χαρακτηριστικά
- Triple-channel kit expands bandwidth with three matched 1GB modules
- DDR3 1333 speed delivers 10666 MT/s data rate for responsive multitasking
- CL9 latency at 1.50V keeps timing tight and power draw low
- 240-pin DIMMs with gold contacts ensure reliable slot connection
- JEDEC-standard SPD programming enables plug-and-play stability at rated frequency
Προδιαγραφές
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR1333D3N9K3/3G |
| Capacity | 3GB (3 x 1GB) |
| Speed | DDR3 1333 (PC3 10666) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Triple Channel Kit |
| Βάρος αποστολής | 0.07 kg |
| Διαστάσεις συσκευασίας | 171 × 95 × 19 mm |
Ερωτήσεις για αυτό το προϊόν
Should I pick this triple-channel kit or a dual-channel alternative for my board?
This kit contains three 1GB modules totalling 3072MB; choose it only if your motherboard supports triple-channel DDR3 and has three available 240-pin slots.
What does the DDR3 1333 (PC3 10666) rating mean once the modules are installed?
The modules run at 1333MHz with CL9 timing at 1.50V, delivering a peak transfer rate of 10666MB/s per module when the platform enables the rated speed.
What interface do these DIMMs use and what does it cap in practice?
Each stick uses a 240-pin DDR3 interface; the bus caps at 1333MHz and the kit cannot exceed the CL9 latency programmed in the SPD.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
