BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278311BTC
Auf Lager
Kingston Technology Corp.
Kingston Technology Corp. KVR1333D3N9K3/3G 3GB (3 x 1GB) DDR3 1333 desktop RAM
Triple-channel kit of three 1GB DDR3 1333 CL9 modules at 1.5V for 3GB total capacity
- Capacity3GB (3 x 1GB)
- SpeedDDR3 1333 (PC3 10666)
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- Triple-channel kit expands bandwidth with three matched 1GB modules
- DDR3 1333 speed delivers 10666 MT/s data rate for responsive multitasking
- CL9 latency at 1.50V keeps timing tight and power draw low
- 240-pin DIMMs with gold contacts ensure reliable slot connection
- JEDEC-standard SPD programming enables plug-and-play stability at rated frequency
Triple-channel DDR3 kit
This Kingston ValueRAM kit provides three 1 GB unbuffered DIMMs for a total of 3 GB. It is built for desktop systems that populate three memory channels simultaneously. The modules run at DDR3 1333 with a CAS latency of CL9 at 1.50 V.
DDR3 1333 bandwidth ceiling
The DDR3 1333 interface (PC3 10666) caps peak transfer rate at the JEDEC-standard 10666 MB/s per module. Real-world throughput will be lower due to protocol overhead and the CL9 timing. No higher speed grade or tighter latency is specified for these modules.
Check 240-pin DDR3 slots and voltage
Verify that the motherboard has three available 240-pin DDR3 slots and supports 1.50 V unbuffered non-ECC memory. The board must also be able to run all three channels in triple-channel mode. Systems limited to dual-channel or requiring registered DIMMs cannot use this kit as intended.
Besonderheiten
- Triple-channel kit expands bandwidth with three matched 1GB modules
- DDR3 1333 speed delivers 10666 MT/s data rate for responsive multitasking
- CL9 latency at 1.50V keeps timing tight and power draw low
- 240-pin DIMMs with gold contacts ensure reliable slot connection
- JEDEC-standard SPD programming enables plug-and-play stability at rated frequency
Technische Daten
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR1333D3N9K3/3G |
| Capacity | 3GB (3 x 1GB) |
| Speed | DDR3 1333 (PC3 10666) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Triple Channel Kit |
| Versandgewicht | 0.07 kg |
| Paketgröße | 171 × 95 × 19 mm |
Fragen zu diesem Artikel
Should I pick this triple-channel kit or a dual-channel alternative for my board?
This kit contains three 1GB modules totalling 3072MB; choose it only if your motherboard supports triple-channel DDR3 and has three available 240-pin slots.
What does the DDR3 1333 (PC3 10666) rating mean once the modules are installed?
The modules run at 1333MHz with CL9 timing at 1.50V, delivering a peak transfer rate of 10666MB/s per module when the platform enables the rated speed.
What interface do these DIMMs use and what does it cap in practice?
Each stick uses a 240-pin DDR3 interface; the bus caps at 1333MHz and the kit cannot exceed the CL9 latency programmed in the SPD.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
