BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Kingston Technology Corp.
Triple-channel kit of three 1GB DDR3 1333 CL9 modules at 1.5V for 3GB total capacity
This Kingston ValueRAM kit provides three 1 GB unbuffered DIMMs for a total of 3 GB. It is built for desktop systems that populate three memory channels simultaneously. The modules run at DDR3 1333 with a CAS latency of CL9 at 1.50 V.
The DDR3 1333 interface (PC3 10666) caps peak transfer rate at the JEDEC-standard 10666 MB/s per module. Real-world throughput will be lower due to protocol overhead and the CL9 timing. No higher speed grade or tighter latency is specified for these modules.
Verify that the motherboard has three available 240-pin DDR3 slots and supports 1.50 V unbuffered non-ECC memory. The board must also be able to run all three channels in triple-channel mode. Systems limited to dual-channel or requiring registered DIMMs cannot use this kit as intended.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR1333D3N9K3/3G |
| Capacity | 3GB (3 x 1GB) |
| Speed | DDR3 1333 (PC3 10666) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Triple Channel Kit |
| 出貨重量 | 0.07 kg |
| 包裝尺寸 | 171 × 95 × 19 mm |
This kit contains three 1GB modules totalling 3072MB; choose it only if your motherboard supports triple-channel DDR3 and has three available 240-pin slots.
The modules run at 1333MHz with CL9 timing at 1.50V, delivering a peak transfer rate of 10666MB/s per module when the platform enables the rated speed.
Each stick uses a 240-pin DDR3 interface; the bus caps at 1333MHz and the kit cannot exceed the CL9 latency programmed in the SPD.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?