Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Lenovo ThinkStation front drive bracket kit for P3 Tower, black metal finish

Lenovo

Lenovo ThinkStation Front Access Storage Enclosure for P3 Tower 4XF1M24244

SKU CH-HH7F-JM42Y

A front-access bracket kit for adding 3.5 and 2.5 drives to a ThinkStation P3 Tower

  • Weight1.00 lbs
  • Add 3.5-inch and 2.5-inch drives to your P3 Tower
  • Front-access design makes drive swaps quick and tool-free
  • Dedicated bracket kit ensures a secure, aligned fit
  • Lightweight 1.00 lbs construction adds minimal chassis weight
  • Purpose-built for ThinkStation P3 Tower compatibility

Front Access Storage Enclosure for P3 Tower

This Lenovo enclosure kit adds a front-accessible drive bay to the ThinkStation P3 Tower. It accepts one 3.5 inch hard drive or one 2.5 inch hard drive for direct storage expansion. The bracket is designed specifically for this workstation chassis.

Included mounting bracket and hardware

The package supplies the dedicated bracket and necessary fixings to secure a drive inside the front enclosure. No additional cables or software utilities are included with the kit. Installation uses the existing drive bay opening on the tower front panel.

Limited to single drive installation

Only one drive can be mounted in the enclosure at a time, restricting total added capacity to a single unit. The interface speed depends entirely on the drive installed and the host system's storage controller. This kit does not support simultaneous dual-drive configurations.

Βασικά χαρακτηριστικά

  • Add 3.5-inch and 2.5-inch drives to your P3 Tower
  • Front-access design makes drive swaps quick and tool-free
  • Dedicated bracket kit ensures a secure, aligned fit
  • Lightweight 1.00 lbs construction adds minimal chassis weight
  • Purpose-built for ThinkStation P3 Tower compatibility

Προδιαγραφές

BrandLenovo
Model4XF1M24244
Part Number4XF1M24244
Weight1.00 lbs

Ερωτήσεις για αυτό το προϊόν

Will the front-access bracket kit need any replacement parts or maintenance after I install a 3.5 or 2.5 drive in my P3 Tower?

The enclosure is a passive metal bracket kit with no moving parts, fans or electronics, so it requires no scheduled maintenance or replacement components once the drives are secured.

What is the first limitation I will hit if I keep both a 3.5 and a 2.5 drive running continuously in the front-access enclosure?

The bracket itself imposes no throughput or thermal limit; the practical ceiling will be the drive’s own sustained transfer rate or the P3 Tower’s front-bay airflow capacity.

Does the enclosure add any audible noise, extra heat or power draw when the workstation runs all day?

It adds zero power draw, generates no heat of its own and has no fans, so any noise or temperature rise comes solely from the installed drives and the system’s existing cooling.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.