暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Lenovo

Lenovo ThinkStation Front Access Storage Enclosure for P3 Tower 4XF1M24244

SKU CH-HH7F-JM42Y

A front-access bracket kit for adding 3.5 and 2.5 drives to a ThinkStation P3 Tower

  • Weight1.00 lbs
  • Add 3.5-inch and 2.5-inch drives to your P3 Tower
  • Front-access design makes drive swaps quick and tool-free
  • Dedicated bracket kit ensures a secure, aligned fit
  • Lightweight 1.00 lbs construction adds minimal chassis weight
  • Purpose-built for ThinkStation P3 Tower compatibility

Front Access Storage Enclosure for P3 Tower

This Lenovo enclosure kit adds a front-accessible drive bay to the ThinkStation P3 Tower. It accepts one 3.5 inch hard drive or one 2.5 inch hard drive for direct storage expansion. The bracket is designed specifically for this workstation chassis.

Included mounting bracket and hardware

The package supplies the dedicated bracket and necessary fixings to secure a drive inside the front enclosure. No additional cables or software utilities are included with the kit. Installation uses the existing drive bay opening on the tower front panel.

Limited to single drive installation

Only one drive can be mounted in the enclosure at a time, restricting total added capacity to a single unit. The interface speed depends entirely on the drive installed and the host system's storage controller. This kit does not support simultaneous dual-drive configurations.

特長

  • Add 3.5-inch and 2.5-inch drives to your P3 Tower
  • Front-access design makes drive swaps quick and tool-free
  • Dedicated bracket kit ensures a secure, aligned fit
  • Lightweight 1.00 lbs construction adds minimal chassis weight
  • Purpose-built for ThinkStation P3 Tower compatibility

仕様

BrandLenovo
Model4XF1M24244
Part Number4XF1M24244
Weight1.00 lbs

この商品に関する質問

Will the front-access bracket kit need any replacement parts or maintenance after I install a 3.5 or 2.5 drive in my P3 Tower?

The enclosure is a passive metal bracket kit with no moving parts, fans or electronics, so it requires no scheduled maintenance or replacement components once the drives are secured.

What is the first limitation I will hit if I keep both a 3.5 and a 2.5 drive running continuously in the front-access enclosure?

The bracket itself imposes no throughput or thermal limit; the practical ceiling will be the drive’s own sustained transfer rate or the P3 Tower’s front-bay airflow capacity.

Does the enclosure add any audible noise, extra heat or power draw when the workstation runs all day?

It adds zero power draw, generates no heat of its own and has no fans, so any noise or temperature rise comes solely from the installed drives and the system’s existing cooling.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。