Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Spool of Crown Gold metallic PLA filament 1.75mm diameter

MakerBot

MakerBot 375-0082A Metallic PLA Filament Crown Gold 1.75mm 2.2 lb 3d printers accessory

SKU CH-C3SN-4WHK2

Metallic PLA filament in Crown Gold, 1.75 mm diameter and 2.2 lb spool, compatible with Sketch and Sketch Large printers

  • ColorCrown Gold
  • Eye-catching metallic shine for standout prints
  • Crown Gold finish adds prestige to student projects
  • Ideal for awards and special achievements
  • 75 mm diameter works with Sketch and Sketch Large
  • 2 lb spool provides plenty of material

Metallic PLA for Sketch Printers

This MakerBot Metallic PLA filament delivers a Crown Gold finish that adds visual prestige to classroom projects and awards. The material is formulated for reliable extrusion on Sketch and Sketch Large printers, producing shiny, attention-grabbing parts. A net weight of 2.2 lbs provides enough material for multiple student builds. The 1.75 mm diameter matches the standard feed path of the supported machines.

Educators and Hobbyists Seeking Decorative Parts

Teachers running STEM programmes and makers who want metallic-looking models without post-processing will appreciate the ready-to-print shine. Users needing engineering-grade strength, high-temperature resistance, or a wide colour palette should consider other filaments. The spool is tailored to the Sketch ecosystem, so owners of non-MakerBot printers must verify compatibility before purchasing.

1.75 mm Diameter Matches Sketch Feed Path

The filament diameter of 1.75 millimetres is the single specification that determines whether this spool will feed correctly in your printer. Sketch and Sketch Large models are designed for this exact size, ensuring consistent flow and reducing the risk of jams. Always confirm your printer accepts 1.75 mm PLA before ordering.

Βασικά χαρακτηριστικά

  • Eye-catching metallic shine for standout prints
  • Crown Gold finish adds prestige to student projects
  • Ideal for awards and special achievements
  • 75 mm diameter works with Sketch and Sketch Large
  • 2 lb spool provides plenty of material

Προδιαγραφές

BrandMakerbot
Model375-0082A
ColorCrown Gold

Ερωτήσεις για αυτό το προϊόν

How do I load this 1.75 mm filament into a MakerBot Sketch printer without the spool binding?

Place the 2.2 lb spool on the external holder, feed the 1.75 mm PLA into the guided inlet until the drive gear engages, then run the Sketch load routine until metallic gold extrudes cleanly.

When will this Crown Gold PLA spool need to be replaced?

Replace the 2.2 lb spool when the remaining filament no longer reaches the extruder inlet; the metallic pigment does not degrade, so only physical depletion dictates change-out.

What is the first limitation that appears during a long print with this metallic PLA?

The 2.2 lb spool mass is the limiting factor; once the 1.75 mm filament runs out the print stops, so plan builds within that net weight.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.