Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Spool of Crown Gold metallic PLA filament 1.75mm diameter

MakerBot

MakerBot 375-0082A Metallic PLA Filament Crown Gold 1.75mm 2.2 lb 3d printers accessory

SKU CH-C3SN-4WHK2

Metallic PLA filament in Crown Gold, 1.75 mm diameter and 2.2 lb spool, compatible with Sketch and Sketch Large printers

  • ColorCrown Gold
  • Eye-catching metallic shine for standout prints
  • Crown Gold finish adds prestige to student projects
  • Ideal for awards and special achievements
  • 75 mm diameter works with Sketch and Sketch Large
  • 2 lb spool provides plenty of material

Metallic PLA for Sketch Printers

This MakerBot Metallic PLA filament delivers a Crown Gold finish that adds visual prestige to classroom projects and awards. The material is formulated for reliable extrusion on Sketch and Sketch Large printers, producing shiny, attention-grabbing parts. A net weight of 2.2 lbs provides enough material for multiple student builds. The 1.75 mm diameter matches the standard feed path of the supported machines.

Educators and Hobbyists Seeking Decorative Parts

Teachers running STEM programmes and makers who want metallic-looking models without post-processing will appreciate the ready-to-print shine. Users needing engineering-grade strength, high-temperature resistance, or a wide colour palette should consider other filaments. The spool is tailored to the Sketch ecosystem, so owners of non-MakerBot printers must verify compatibility before purchasing.

1.75 mm Diameter Matches Sketch Feed Path

The filament diameter of 1.75 millimetres is the single specification that determines whether this spool will feed correctly in your printer. Sketch and Sketch Large models are designed for this exact size, ensuring consistent flow and reducing the risk of jams. Always confirm your printer accepts 1.75 mm PLA before ordering.

Privalumai

  • Eye-catching metallic shine for standout prints
  • Crown Gold finish adds prestige to student projects
  • Ideal for awards and special achievements
  • 75 mm diameter works with Sketch and Sketch Large
  • 2 lb spool provides plenty of material

Specifikacijos

BrandMakerbot
Model375-0082A
ColorCrown Gold

Klausimai apie šią prekę

How do I load this 1.75 mm filament into a MakerBot Sketch printer without the spool binding?

Place the 2.2 lb spool on the external holder, feed the 1.75 mm PLA into the guided inlet until the drive gear engages, then run the Sketch load routine until metallic gold extrudes cleanly.

When will this Crown Gold PLA spool need to be replaced?

Replace the 2.2 lb spool when the remaining filament no longer reaches the extruder inlet; the metallic pigment does not degrade, so only physical depletion dictates change-out.

What is the first limitation that appears during a long print with this metallic PLA?

The 2.2 lb spool mass is the limiting factor; once the 1.75 mm filament runs out the print stops, so plan builds within that net weight.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.