暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Spool of Crown Gold metallic PLA filament 1.75mm diameter

MakerBot

MakerBot 375-0082A Metallic PLA Filament Crown Gold 1.75mm 2.2 lb 3d printers accessory

SKU CH-C3SN-4WHK2

Metallic PLA filament in Crown Gold, 1.75 mm diameter and 2.2 lb spool, compatible with Sketch and Sketch Large printers

  • ColorCrown Gold
  • Eye-catching metallic shine for standout prints
  • Crown Gold finish adds prestige to student projects
  • Ideal for awards and special achievements
  • 75 mm diameter works with Sketch and Sketch Large
  • 2 lb spool provides plenty of material

Metallic PLA for Sketch Printers

This MakerBot Metallic PLA filament delivers a Crown Gold finish that adds visual prestige to classroom projects and awards. The material is formulated for reliable extrusion on Sketch and Sketch Large printers, producing shiny, attention-grabbing parts. A net weight of 2.2 lbs provides enough material for multiple student builds. The 1.75 mm diameter matches the standard feed path of the supported machines.

Educators and Hobbyists Seeking Decorative Parts

Teachers running STEM programmes and makers who want metallic-looking models without post-processing will appreciate the ready-to-print shine. Users needing engineering-grade strength, high-temperature resistance, or a wide colour palette should consider other filaments. The spool is tailored to the Sketch ecosystem, so owners of non-MakerBot printers must verify compatibility before purchasing.

1.75 mm Diameter Matches Sketch Feed Path

The filament diameter of 1.75 millimetres is the single specification that determines whether this spool will feed correctly in your printer. Sketch and Sketch Large models are designed for this exact size, ensuring consistent flow and reducing the risk of jams. Always confirm your printer accepts 1.75 mm PLA before ordering.

特長

  • Eye-catching metallic shine for standout prints
  • Crown Gold finish adds prestige to student projects
  • Ideal for awards and special achievements
  • 75 mm diameter works with Sketch and Sketch Large
  • 2 lb spool provides plenty of material

仕様

BrandMakerbot
Model375-0082A
ColorCrown Gold

この商品に関する質問

How do I load this 1.75 mm filament into a MakerBot Sketch printer without the spool binding?

Place the 2.2 lb spool on the external holder, feed the 1.75 mm PLA into the guided inlet until the drive gear engages, then run the Sketch load routine until metallic gold extrudes cleanly.

When will this Crown Gold PLA spool need to be replaced?

Replace the 2.2 lb spool when the remaining filament no longer reaches the extruder inlet; the metallic pigment does not degrade, so only physical depletion dictates change-out.

What is the first limitation that appears during a long print with this metallic PLA?

The 2.2 lb spool mass is the limiting factor; once the 1.75 mm filament runs out the print stops, so plan builds within that net weight.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。