Silver 3.5 inch bare hard drive with 80 pin SCSI connector

Maxtor

Maxtor Atlas 10K V 8J300J0 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive

SKU CH-Z893-X1GEQ MPN 8J300J0

300 GB 10000 RPM SCSI Ultra320 80-pin drive with 8 MB cache and 4.4 ms seek time for server storage

PackagingBare Drive
InterfaceSCSI Ultra320 80pin
Capacity300GB
RPM10000 RPM
Cache8MB
Average Seek Time4.4ms

10000 RPM spindle speed cuts average seek to 4.4 ms
8 MB cache and Ultra320 SCSI interface sustain high-throughput server workloads
300 GB capacity in a 3.5 inch form factor fits standard drive bays
MaxAdapt technology eases integration into existing SCSI environments
Per-platter density doubles that of 15K RPM drives for efficient storage scaling

502,99 $

0.00622143 BTC με τη σημερινή ισοτιμία

Διαθέσιμο · αποστολή σήμερα

Το ταμείο κλειδώνει την ισοτιμία σας για 30 λεπτά.

Παράδοση προς Ηνωμένες Πολιτείες εκτίμηση

UPS Worldwide Expedited 3–6 εργάσιμες ημέρες Δωρεάν
DHL Express Worldwide 2–3 εργάσιμες ημέρες 74,90 $

Οι εισαγωγικοί δασμοί επιβάλλονται κατά την άφιξη από τη χώρα σας.

Αποστολή αλλού

Server storage upgrade

The Maxtor Atlas 10K V 8J300J0 is a 300GB 10000 RPM internal hard drive built for server environments. Its SCSI Ultra320 80pin interface and 8MB cache support high-throughput workloads where consistent rotational speed matters.

Direct 80-pin mounting

The bare drive plugs straight into an 80-pin backplane or hot-swap cage without extra cabling. Ensure the host bus adapter or RAID controller supports SCSI Ultra320 signalling and that termination is correct, otherwise the drive will not be detected.

Verify SCSI Ultra320 backplane

Confirm your chassis provides an 80-pin SCA connector with active termination and adequate cooling for a 10000 RPM unit. This drive is not suited for desktop PCs lacking native SCSI controllers or for arrays requiring larger capacities.

Βασικά χαρακτηριστικά

10000 RPM spindle speed cuts average seek to 4.4 ms
8 MB cache and Ultra320 SCSI interface sustain high-throughput server workloads
300 GB capacity in a 3.5 inch form factor fits standard drive bays
MaxAdapt technology eases integration into existing SCSI environments
Per-platter density doubles that of 15K RPM drives for efficient storage scaling

Προδιαγραφές

Brand	Maxtor
Series	Atlas 10K V
Model	8J300J0
Packaging	Bare Drive
Interface	SCSI Ultra320 80pin
Capacity	300GB
RPM	10000 RPM
Cache	8MB
Average Seek Time	4.4ms
Average Write Time	4.9ms
Average Latency	3ms
Features	Ease of integration MaxAdapt® Double the capacity of 15K RPM drives (per platter) SCSI investment protection
Usage	Ideal for Servers
Form Factor	3.5"
Βάρος αποστολής	0.91 kg
Διαστάσεις συσκευασίας	152 × 127 × 51 mm

Ερωτήσεις για αυτό το προϊόν

How can I verify the Maxtor Atlas 10K V 8J300J0 is performing correctly after installation?

Check that the drive is detected at the full 300GB capacity and that the SCSI Ultra320 80pin interface negotiates the expected transfer rate. Monitoring tools should report the 10000 RPM spindle speed and average seek time near 4.4ms during operation.

What is included with the bare-drive 8J300J0 and what must I source separately?

The package contains only the 3.5-inch hard drive itself. You will need to provide a compatible SCSI Ultra320 80pin cable or backplane, mounting screws or rails for a 3.5-inch bay, and a power connector suited to the drive.

Which capacity version of the Atlas 10K V should I choose for a server needing maximum platter density?

The 300GB model delivers double the capacity of 15K RPM drives per platter, making it the highest-density option in this series for server workloads that prioritise storage space over peak rotational speed.

Επίσης σε αυτό το ράφι