Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Silver 3.5 inch bare hard drive with 80 pin SCSI connector

Maxtor

Maxtor Atlas 10K V 8J300J0 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive

SKU CH-Z893-X1GEQ MPN 8J300J0

300 GB 10000 RPM SCSI Ultra320 80-pin drive with 8 MB cache and 4.4 ms seek time for server storage

  • PackagingBare Drive
  • InterfaceSCSI Ultra320 80pin
  • Capacity300GB
  • RPM10000 RPM
  • Cache8MB
  • Average Seek Time4.4ms
  • 10000 RPM spindle speed cuts average seek to 4.4 ms
  • 8 MB cache and Ultra320 SCSI interface sustain high-throughput server workloads
  • 300 GB capacity in a 3.5 inch form factor fits standard drive bays
  • MaxAdapt technology eases integration into existing SCSI environments
  • Per-platter density doubles that of 15K RPM drives for efficient storage scaling

Server storage upgrade

The Maxtor Atlas 10K V 8J300J0 is a 300GB 10000 RPM internal hard drive built for server environments. Its SCSI Ultra320 80pin interface and 8MB cache support high-throughput workloads where consistent rotational speed matters.

Direct 80-pin mounting

The bare drive plugs straight into an 80-pin backplane or hot-swap cage without extra cabling. Ensure the host bus adapter or RAID controller supports SCSI Ultra320 signalling and that termination is correct, otherwise the drive will not be detected.

Verify SCSI Ultra320 backplane

Confirm your chassis provides an 80-pin SCA connector with active termination and adequate cooling for a 10000 RPM unit. This drive is not suited for desktop PCs lacking native SCSI controllers or for arrays requiring larger capacities.

Акценти

  • 10000 RPM spindle speed cuts average seek to 4.4 ms
  • 8 MB cache and Ultra320 SCSI interface sustain high-throughput server workloads
  • 300 GB capacity in a 3.5 inch form factor fits standard drive bays
  • MaxAdapt technology eases integration into existing SCSI environments
  • Per-platter density doubles that of 15K RPM drives for efficient storage scaling

Спецификации

BrandMaxtor
SeriesAtlas 10K V
Model8J300J0
PackagingBare Drive
InterfaceSCSI Ultra320 80pin
Capacity300GB
RPM10000 RPM
Cache8MB
Average Seek Time4.4ms
Average Write Time4.9ms
Average Latency3ms
FeaturesEase of integration
MaxAdapt®
Double the capacity of 15K RPM drives (per platter)
SCSI investment protection
UsageIdeal for Servers
Form Factor3.5"
Тегло на пратката0.91 kg
Размери на опаковката152 × 127 × 51 mm

Въпроси за този артикул

How can I verify the Maxtor Atlas 10K V 8J300J0 is performing correctly after installation?

Check that the drive is detected at the full 300GB capacity and that the SCSI Ultra320 80pin interface negotiates the expected transfer rate. Monitoring tools should report the 10000 RPM spindle speed and average seek time near 4.4ms during operation.

What is included with the bare-drive 8J300J0 and what must I source separately?

The package contains only the 3.5-inch hard drive itself. You will need to provide a compatible SCSI Ultra320 80pin cable or backplane, mounting screws or rails for a 3.5-inch bay, and a power connector suited to the drive.

Which capacity version of the Atlas 10K V should I choose for a server needing maximum platter density?

The 300GB model delivers double the capacity of 15K RPM drives per platter, making it the highest-density option in this series for server workloads that prioritise storage space over peak rotational speed.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.