Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση
Rectangular metal power supply unit with built-in fan and terminal connections

myVolts

myVolts SE-450 12V 37.5A Power Supply

SKU CH-F1RY-STSP9

Delivers 450 W at 12 V with 37.5 A output, built-in remote sense, forced-air cooling and full protection suite for LED lighting and industrial control systems

  • TypeAT
  • Delivers 12 V at 37.5 A for high-current LED and industrial loads
  • Remote sense compensates voltage drop across long cable runs
  • Built-in DC fan provides forced-air cooling under continuous operation
  • Multiple protections guard against short circuit, overload, over-voltage and over-temperature
  • Selectable AC input range adapts to different mains voltages

Industrial 12 V power supply

The myVolts SE-450 delivers a steady 12 V at 37.5 A for LED lighting, light boxes, strip installations and industrial control cabinets. It is built for integrators who need a single-output unit that fits standard AT mounting and includes a remote-sense function for voltage accuracy at the load.

Thermals and noise in normal use

Forced air cooling comes from a built-in DC ball-bearing fan that runs whenever the unit is powered. Protections against short circuit, overload, over voltage and over temperature activate automatically, keeping the enclosure within safe limits during typical lighting or monitoring duty.

Behaviour under sustained load

The supply maintains its rated 450 W output continuously thanks to the active cooling design and surge-current limiting at the AC input. Remote sensing compensates for cable drop so the load sees the correct voltage even during extended operation in automation, laser or distribution-cabinet systems.

Βασικά χαρακτηριστικά

  • Delivers 12 V at 37.5 A for high-current LED and industrial loads
  • Remote sense compensates voltage drop across long cable runs
  • Built-in DC fan provides forced-air cooling under continuous operation
  • Multiple protections guard against short circuit, overload, over-voltage and over-temperature
  • Selectable AC input range adapts to different mains voltages

Προδιαγραφές

TypeAT

Ερωτήσεις για αυτό το προϊόν

How do I install the SE-450-12 and which wiring step is most often missed?

Mount the unit with clearance for the built-in DC ball bearing fan airflow, connect the AC input after confirming the voltage selector switch position, then wire the 12 V output terminals; the step most often missed is attaching the remote sense leads to the load so voltage drop under 37.5 A is compensated.

What maintenance or replacement will this power supply need over time?

The internal DC ball bearing fan is the only moving part; plan to clean dust from its intake vents periodically and replace the fan assembly if bearing noise appears or airflow drops enough to trigger over-temperature protection.

What limit appears first when the SE-450-12 runs continuously at full load?

Forced air cooling by the built-in fan sets the practical ceiling; sustained 450 W output at 12 V 37.5 A will hit over-temperature protection first if inlet air exceeds the unit's rated ambient or if dust restricts the fan.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.