BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278391BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2933MHz CL21 1.2V 288-Pin UDIMM memory upgrade
16 GB dual-channel DDR4-2933 CL21 kit validated for Supermicro workstations
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit (2×8 GB) doubles system memory capacity
- DDR4 2933 MT/s speed supports fast data throughput
- CL21 latency timed for responsive operation
- 2 V low voltage reduces power draw
- 288-pin UDIMM fits compatible Supermicro boards
SuperMicro DDR4 2933MHz Kit
This 16GB kit contains two 8GB DDR4 UDIMM modules rated at 2933MHz with CL21 latency. It is built for SuperMicro desktop and SuperWorkstation motherboards such as the MBD-C9X299-PGF. The unbuffered, non-ECC design suits standard workstation workloads.
Upgrade from lower capacity or speed
Replacing a smaller DDR4 kit or slower modules adds bandwidth for multi-threaded applications and virtual machines. The jump is worth it when the board supports 2933MHz operation and the workload exceeds the current memory ceiling.
Check motherboard qualification list
Verify that the specific SuperMicro model accepts 1Rx8 288-pin UDIMMs at 1.2V without ECC. Confirm the number of available slots and the maximum supported capacity per slot before ordering.
Βασικά χαρακτηριστικά
- 16 GB kit (2×8 GB) doubles system memory capacity
- DDR4 2933 MT/s speed supports fast data throughput
- CL21 latency timed for responsive operation
- 2 V low voltage reduces power draw
- 288-pin UDIMM fits compatible Supermicro boards
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Ερωτήσεις για αυτό το προϊόν
Will the 288-pin DDR4 UDIMM modules fit my Supermicro motherboard's memory slots?
Yes, the 288-pin DDR4 UDIMM form factor matches standard desktop and workstation DIMM slots on compatible Supermicro boards.
What is the correct way to seat the two 8GB sticks so the system recognises the full 16GB kit?
Align the notch on each module with the slot key, press straight down until both side clips click, and populate the channels indicated in the motherboard manual.
Do these non-ECC unbuffered modules require any firmware updates or periodic re-seating over time?
No firmware updates are needed for the memory itself, and the gold-edge contacts do not require routine re-seating under normal operation.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
