Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Two green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933MHz CL21 1.2V 288-Pin UDIMM memory upgrade

SKU CH-T0N3-7W4QP

16 GB dual-channel DDR4-2933 CL21 kit validated for Supermicro workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit (2×8 GB) doubles system memory capacity
  • DDR4 2933 MT/s speed supports fast data throughput
  • CL21 latency timed for responsive operation
  • 2 V low voltage reduces power draw
  • 288-pin UDIMM fits compatible Supermicro boards

SuperMicro DDR4 2933MHz Kit

This 16GB kit contains two 8GB DDR4 UDIMM modules rated at 2933MHz with CL21 latency. It is built for SuperMicro desktop and SuperWorkstation motherboards such as the MBD-C9X299-PGF. The unbuffered, non-ECC design suits standard workstation workloads.

Upgrade from lower capacity or speed

Replacing a smaller DDR4 kit or slower modules adds bandwidth for multi-threaded applications and virtual machines. The jump is worth it when the board supports 2933MHz operation and the workload exceeds the current memory ceiling.

Check motherboard qualification list

Verify that the specific SuperMicro model accepts 1Rx8 288-pin UDIMMs at 1.2V without ECC. Confirm the number of available slots and the maximum supported capacity per slot before ordering.

Poudarki

  • 16 GB kit (2×8 GB) doubles system memory capacity
  • DDR4 2933 MT/s speed supports fast data throughput
  • CL21 latency timed for responsive operation
  • 2 V low voltage reduces power draw
  • 288-pin UDIMM fits compatible Supermicro boards

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Vprašanja o tem izdelku

Will the 288-pin DDR4 UDIMM modules fit my Supermicro motherboard's memory slots?

Yes, the 288-pin DDR4 UDIMM form factor matches standard desktop and workstation DIMM slots on compatible Supermicro boards.

What is the correct way to seat the two 8GB sticks so the system recognises the full 16GB kit?

Align the notch on each module with the slot key, press straight down until both side clips click, and populate the channels indicated in the motherboard manual.

Do these non-ECC unbuffered modules require any firmware updates or periodic re-seating over time?

No firmware updates are needed for the memory itself, and the gold-edge contacts do not require routine re-seating under normal operation.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.