BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00276906BTC
Διαθέσιμο
NEMIX RAM
NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX XT-5315 JIVA 15 memory upgrade
An 8 GB kit of two 4 GB DDR3 SODIMM modules running at 1333 MHz for the POSIFLEX XT-5315 JIVA 15 terminal
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX XT-5315 JIVA 15 terminal
- 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
- Low-voltage 1.35V DDR3 reduces power draw
- 204-pin SODIMM fits compatible POS systems
- Non-ECC unbuffered modules tested for stability
POSIFLEX XT-5315 JIVA 15 compatible kit
This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5315 JIVA 15 terminal. It delivers a straightforward memory upgrade for point-of-sale systems needing more capacity. The 204-pin form factor matches the slots used in this hardware.
Low-voltage DDR3 operation
Each module runs at 1.35 V and 1333 MHz with CL9 latency, keeping power draw modest in a compact terminal chassis. Unbuffered, non-ECC chips generate minimal heat without a spreader, so fan noise stays low during typical retail workloads.
Ready-to-install dual-module kit
The package supplies a matched pair so both channels populate at once, avoiding single-channel bottlenecks. No extra cables, drivers or configuration tools are included; installation follows the terminal's own service guide.
Βασικά χαρακτηριστικά
- Designed for POSIFLEX XT-5315 JIVA 15 terminal
- 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
- Low-voltage 1.35V DDR3 reduces power draw
- 204-pin SODIMM fits compatible POS systems
- Non-ECC unbuffered modules tested for stability
Προδιαγραφές
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K2 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Ερωτήσεις για αυτό το προϊόν
How do I install the 204-pin DDR3 SODIMM modules in the POSIFLEX XT-5315 JIVA 15 terminal, and what step is often missed?
Power off and unplug the terminal, open the memory compartment, align the notch on each 204-pin module with the slot key, insert at an angle then press down until the retention clips click; the step often missed is confirming both clips lock fully on each module.
What maintenance or replacement will this 2Rx8 DDR3 1333 kit need during its service life?
No scheduled maintenance is required; keep the terminal vents clear of dust so the unbuffered modules stay cool, and replace only if a module fails — the kit uses major OEM Samsung, Micron or Hynix chips rated for continuous operation.
What limit appears first when the POS terminal runs sustained workloads with this CL9 1.35 V memory?
The DDR3 1333 (PC3-10600) bandwidth ceiling is reached before the CAS latency or voltage becomes a bottleneck, so throughput tops out at the rated 1333 MT/s transfer rate under heavy load.
Επίσης σε αυτό το ράφι
Οι πελάτες σύγκριναν και αυτά
Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.
