我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR3 SODIMM modules with gold contacts

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX XT-5315 JIVA 15 memory upgrade

SKU CH-2H68-9X9BD

An 8 GB kit of two 4 GB DDR3 SODIMM modules running at 1333 MHz for the POSIFLEX XT-5315 JIVA 15 terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-5315 JIVA 15 terminal
  • 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
  • Low-voltage 1.35V DDR3 reduces power draw
  • 204-pin SODIMM fits compatible POS systems
  • Non-ECC unbuffered modules tested for stability

POSIFLEX XT-5315 JIVA 15 compatible kit

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5315 JIVA 15 terminal. It delivers a straightforward memory upgrade for point-of-sale systems needing more capacity. The 204-pin form factor matches the slots used in this hardware.

Low-voltage DDR3 operation

Each module runs at 1.35 V and 1333 MHz with CL9 latency, keeping power draw modest in a compact terminal chassis. Unbuffered, non-ECC chips generate minimal heat without a spreader, so fan noise stays low during typical retail workloads.

Ready-to-install dual-module kit

The package supplies a matched pair so both channels populate at once, avoiding single-channel bottlenecks. No extra cables, drivers or configuration tools are included; installation follows the terminal's own service guide.

商品特色

  • Designed for POSIFLEX XT-5315 JIVA 15 terminal
  • 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
  • Low-voltage 1.35V DDR3 reduces power draw
  • 204-pin SODIMM fits compatible POS systems
  • Non-ECC unbuffered modules tested for stability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

商品問答

How do I install the 204-pin DDR3 SODIMM modules in the POSIFLEX XT-5315 JIVA 15 terminal, and what step is often missed?

Power off and unplug the terminal, open the memory compartment, align the notch on each 204-pin module with the slot key, insert at an angle then press down until the retention clips click; the step often missed is confirming both clips lock fully on each module.

What maintenance or replacement will this 2Rx8 DDR3 1333 kit need during its service life?

No scheduled maintenance is required; keep the terminal vents clear of dust so the unbuffered modules stay cool, and replace only if a module fails — the kit uses major OEM Samsung, Micron or Hynix chips rated for continuous operation.

What limit appears first when the POS terminal runs sustained workloads with this CL9 1.35 V memory?

The DDR3 1333 (PC3-10600) bandwidth ceiling is reached before the CAS latency or voltage becomes a bottleneck, so throughput tops out at the rated 1333 MT/s transfer rate under heavy load.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。