Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR3 SODIMM modules with gold contacts

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM Kit POSIFLEX XT-5315 JIVA 15 memory upgrade

SKU CH-2H68-9X9BD

An 8 GB kit of two 4 GB DDR3 SODIMM modules running at 1333 MHz for the POSIFLEX XT-5315 JIVA 15 terminal

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX XT-5315 JIVA 15 terminal
  • 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
  • Low-voltage 1.35V DDR3 reduces power draw
  • 204-pin SODIMM fits compatible POS systems
  • Non-ECC unbuffered modules tested for stability

POSIFLEX XT-5315 JIVA 15 compatible kit

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5315 JIVA 15 terminal. It delivers a straightforward memory upgrade for point-of-sale systems needing more capacity. The 204-pin form factor matches the slots used in this hardware.

Low-voltage DDR3 operation

Each module runs at 1.35 V and 1333 MHz with CL9 latency, keeping power draw modest in a compact terminal chassis. Unbuffered, non-ECC chips generate minimal heat without a spreader, so fan noise stays low during typical retail workloads.

Ready-to-install dual-module kit

The package supplies a matched pair so both channels populate at once, avoiding single-channel bottlenecks. No extra cables, drivers or configuration tools are included; installation follows the terminal's own service guide.

Pluspunten

  • Designed for POSIFLEX XT-5315 JIVA 15 terminal
  • 8GB kit (2x4GB) DDR3 1333 PC3-10600 speed
  • Low-voltage 1.35V DDR3 reduces power draw
  • 204-pin SODIMM fits compatible POS systems
  • Non-ECC unbuffered modules tested for stability

Specificaties

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Vragen over dit artikel

How do I install the 204-pin DDR3 SODIMM modules in the POSIFLEX XT-5315 JIVA 15 terminal, and what step is often missed?

Power off and unplug the terminal, open the memory compartment, align the notch on each 204-pin module with the slot key, insert at an angle then press down until the retention clips click; the step often missed is confirming both clips lock fully on each module.

What maintenance or replacement will this 2Rx8 DDR3 1333 kit need during its service life?

No scheduled maintenance is required; keep the terminal vents clear of dust so the unbuffered modules stay cool, and replace only if a module fails — the kit uses major OEM Samsung, Micron or Hynix chips rated for continuous operation.

What limit appears first when the POS terminal runs sustained workloads with this CL9 1.35 V memory?

The DDR3 1333 (PC3-10600) bandwidth ceiling is reached before the CAS latency or voltage becomes a bottleneck, so throughput tops out at the rated 1333 MT/s transfer rate under heavy load.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.