Δεχόμαστε κρυπτονομίσματα — έτσι ώστε αυτά που κατέχετε να μπορούν να αγοράσουν πραγματικό εξοπλισμό.Πληρώστε σε κρυπτονομίσματα, ξοδέψτε τα σε πραγματικό εξοπλισμό. Δωρεάν ασφαλισμένη αποστολή παγκοσμίως άνω των 399 $. Ουδέτερες κούτες αποστολής, χωρίς σήμανση, από τη Γερμανία.Δωρεάν ασφαλισμένη αποστολή άνω των 399 $. Η ισοτιμία σας κλειδώνει για 30 λεπτά μόλις ανοίξει το ταμείο.Κλείδωμα ισοτιμίας 30 λεπτών. Κάθε προϊόν είναι σφραγισμένο, ελεγμένο ως προς τον σειριακό αριθμό του, και καλύπτεται από εγγύηση 24 μηνών.Σφραγισμένο, με εγγύηση 24 μηνών.

Παρακολουθούμενα είδη Σύνδεση

OWC

OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)

SKU CH-G23Q-XHXA9

A 4GB DDR4 2400 SODIMM module built for the NCR POS Kitchen Controller 5 (1925)

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • Boosts POS responsiveness with 4 GB DDR4 2400 module
  • JEDEC-standard build ensures warranty-safe upgrade path
  • Low 1.2 V operation keeps system power draw minimal
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Direct-fit 260-pin SODIMM installs in minutes without tools

System-Specific DDR4 Module

This OWC 4GB DDR4 2400 SODIMM is built for the NCR POS Kitchen Controller 5 (1925). It delivers a JEDEC-standard PC4-19200 CL17 upgrade in a single unbuffered non-ECC module. The part number 2S4D41R804GB confirms exact OEM compatibility.

Installation Requirements

The module fits a 260-pin DDR4 slot and runs at 1.2V without a heat spreader. Its 1Rx8 rank layout matches the controller’s memory architecture, freeing the second slot for an identical stick if the board supports dual-channel operation. No BIOS configuration or voltage adjustment is required.

Target Audience

Technicians servicing the Kitchen Controller 5 (1925) who need a warranty-safe capacity increase should use this module. Builders working on any other platform, or anyone needing ECC, registered DIMMs, or a different speed grade, must select a different part.

Βασικά χαρακτηριστικά

  • Boosts POS responsiveness with 4 GB DDR4 2400 module
  • JEDEC-standard build ensures warranty-safe upgrade path
  • Low 1.2 V operation keeps system power draw minimal
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Direct-fit 260-pin SODIMM installs in minutes without tools

Προδιαγραφές

BrandOWC
Part Number2S4D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemNCR POS Kitchen Controller 5 (1925)

Άλλες εκδόσεις αυτού του μοντέλου

5 ακόμη στην ίδια σειρά

Ίδια οικογένεια, διαφορετική μνήμη, ψύκτρα ή συχνότητα — συγκρίνετε πριν αποφασίσετε.

Ερωτήσεις για αυτό το προϊόν

Will the 260-pin SODIMM fit the single memory slot on my Kitchen Controller 5 (1925) without a heat spreader?

Yes, the 4 GB module is built to the exact 260-pin DDR4 form factor used by the Kitchen Controller 5 and has no heat spreader, so it seats directly in the slot.

How much power does the 1.2 V DDR4 module draw when the terminal runs continuously?

The module operates at the standard 1.2 V DDR4 voltage, keeping power draw low even during all-day operation in the POS unit.

Do I need matching OWC sticks or can I add this 4 GB module alongside the original memory?

OWC recommends using modules of the same capacity, speed and manufacturer for optimal performance, so pairing this stick with an identical 4 GB DDR4 2400 CL17 module is advised.

Επίσης σε αυτό το ράφι

Οι πελάτες σύγκριναν και αυτά

Ίδιο ράφι, ίδιο ταμείο — οκτώ νομίσματα και κλείδωμα ισοτιμίας 30 λεπτών.