暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

OWC

OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)

SKU CH-G23Q-XHXA9

A 4GB DDR4 2400 SODIMM module built for the NCR POS Kitchen Controller 5 (1925)

  • Capacity4GB
  • Type260-Pin DDR4 Non-ECC SODIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • Boosts POS responsiveness with 4 GB DDR4 2400 module
  • JEDEC-standard build ensures warranty-safe upgrade path
  • Low 1.2 V operation keeps system power draw minimal
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Direct-fit 260-pin SODIMM installs in minutes without tools

System-Specific DDR4 Module

This OWC 4GB DDR4 2400 SODIMM is built for the NCR POS Kitchen Controller 5 (1925). It delivers a JEDEC-standard PC4-19200 CL17 upgrade in a single unbuffered non-ECC module. The part number 2S4D41R804GB confirms exact OEM compatibility.

Installation Requirements

The module fits a 260-pin DDR4 slot and runs at 1.2V without a heat spreader. Its 1Rx8 rank layout matches the controller’s memory architecture, freeing the second slot for an identical stick if the board supports dual-channel operation. No BIOS configuration or voltage adjustment is required.

Target Audience

Technicians servicing the Kitchen Controller 5 (1925) who need a warranty-safe capacity increase should use this module. Builders working on any other platform, or anyone needing ECC, registered DIMMs, or a different speed grade, must select a different part.

特長

  • Boosts POS responsiveness with 4 GB DDR4 2400 module
  • JEDEC-standard build ensures warranty-safe upgrade path
  • Low 1.2 V operation keeps system power draw minimal
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Direct-fit 260-pin SODIMM installs in minutes without tools

仕様

BrandOWC
Part Number2S4D41R804GB
Capacity4GB
Type260-Pin DDR4 Non-ECC SODIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemNCR POS Kitchen Controller 5 (1925)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 260-pin SODIMM fit the single memory slot on my Kitchen Controller 5 (1925) without a heat spreader?

Yes, the 4 GB module is built to the exact 260-pin DDR4 form factor used by the Kitchen Controller 5 and has no heat spreader, so it seats directly in the slot.

How much power does the 1.2 V DDR4 module draw when the terminal runs continuously?

The module operates at the standard 1.2 V DDR4 voltage, keeping power draw low even during all-day operation in the POS unit.

Do I need matching OWC sticks or can I add this 4 GB module alongside the original memory?

OWC recommends using modules of the same capacity, speed and manufacturer for optimal performance, so pairing this stick with an identical 4 GB DDR4 2400 CL17 module is advised.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。