暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM module with black memory chips and gold edge connector

OWC

OWC 8GB DDR3 1066 PC3-8500 CL7 2Rx8 204-pin 1.5V SODIMM for N3000 (1657)

SKU CH-DZ1B-8K26D

8GB DDR3 1066 PC3-8500 CL7 204-pin SODIMM for NCR N3000 site controller

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • 8GB capacity boosts multitasking for POS N3000 (1657)
  • DDR3 1066 PC3-8500 CL7 speed matches system specs
  • 5V operation meets JEDEC standard for reliable performance
  • 204-pin SODIMM form factor fits N3000 site controller slot
  • 2Rx8 dual-rank design delivers full 8GB in single module

Targeted System Upgrade

This 8GB DDR3 SODIMM is built specifically for the NCR POS N3000 Site Controller (1657). It provides a single-module memory increase for that platform. The module suits technicians maintaining or expanding existing point-of-sale deployments. Buyers needing a different form factor or a newer memory generation cannot use this part.

Build Integration Details

The module uses a 204-pin SO-DIMM edge connector and operates at 1.5V, matching the electrical and mechanical requirements of the target system. It runs at DDR3 1066 (PC3-8500) with CL7 latency and a 2Rx8 organisation. No heat spreader is fitted, so the module relies on chassis airflow. Systems requiring ECC, registered buffering, or a different pin count are not compatible.

Included Extras and Compliance

The stick ships as a JEDEC-standard, RoHS-compliant component that preserves the original equipment warranty. OWC backs the module with a limited lifetime warranty and free technical support. No additional cables, brackets, or software utilities are bundled with the memory itself.

特長

  • 8GB capacity boosts multitasking for POS N3000 (1657)
  • DDR3 1066 PC3-8500 CL7 speed matches system specs
  • 5V operation meets JEDEC standard for reliable performance
  • 204-pin SODIMM form factor fits N3000 site controller slot
  • 2Rx8 dual-rank design delivers full 8GB in single module

仕様

BrandOWC
Part Number8S5D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemNCR POS N3000 Site Controller (1657)

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 1.5 V DDR3 1066 CL7 module throttle under sustained all-day workloads?

The module runs at standard JEDEC 1.5 V with CL7 latency and no heat spreader; thermal limits depend on the N3000 chassis airflow, not the DIMM itself.

How much heat or fan noise does this 8 GB SODIMM add when the N3000 runs continuously?

The unbuffered 2Rx8 DDR3 part draws nominal 1.5 V power and has no onboard cooling; any extra heat or noise comes from the system’s own fans, not the memory.

Does the N3000 site controller (1657) need a specific BIOS version or matching DIMM to accept this 204-pin upgrade?

The module is tested for the N3000 (1657) and follows JEDEC PC3-8500 specs; install it in an available 204-pin slot — no extra parts required.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。