Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board SODIMM module with black memory chips and gold edge connector

OWC

OWC 8GB DDR3 1066 PC3-8500 CL7 2Rx8 204-pin 1.5V SODIMM for N3000 (1657)

SKU CH-DZ1B-8K26D

8GB DDR3 1066 PC3-8500 CL7 204-pin SODIMM for NCR N3000 site controller

  • Capacity8GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • 8GB capacity boosts multitasking for POS N3000 (1657)
  • DDR3 1066 PC3-8500 CL7 speed matches system specs
  • 5V operation meets JEDEC standard for reliable performance
  • 204-pin SODIMM form factor fits N3000 site controller slot
  • 2Rx8 dual-rank design delivers full 8GB in single module

Targeted System Upgrade

This 8GB DDR3 SODIMM is built specifically for the NCR POS N3000 Site Controller (1657). It provides a single-module memory increase for that platform. The module suits technicians maintaining or expanding existing point-of-sale deployments. Buyers needing a different form factor or a newer memory generation cannot use this part.

Build Integration Details

The module uses a 204-pin SO-DIMM edge connector and operates at 1.5V, matching the electrical and mechanical requirements of the target system. It runs at DDR3 1066 (PC3-8500) with CL7 latency and a 2Rx8 organisation. No heat spreader is fitted, so the module relies on chassis airflow. Systems requiring ECC, registered buffering, or a different pin count are not compatible.

Included Extras and Compliance

The stick ships as a JEDEC-standard, RoHS-compliant component that preserves the original equipment warranty. OWC backs the module with a limited lifetime warranty and free technical support. No additional cables, brackets, or software utilities are bundled with the memory itself.

Priekšrocības

  • 8GB capacity boosts multitasking for POS N3000 (1657)
  • DDR3 1066 PC3-8500 CL7 speed matches system specs
  • 5V operation meets JEDEC standard for reliable performance
  • 204-pin SODIMM form factor fits N3000 site controller slot
  • 2Rx8 dual-rank design delivers full 8GB in single module

Specifikācijas

BrandOWC
Part Number8S5D32R808GB
Capacity8GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemNCR POS N3000 Site Controller (1657)

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 1.5 V DDR3 1066 CL7 module throttle under sustained all-day workloads?

The module runs at standard JEDEC 1.5 V with CL7 latency and no heat spreader; thermal limits depend on the N3000 chassis airflow, not the DIMM itself.

How much heat or fan noise does this 8 GB SODIMM add when the N3000 runs continuously?

The unbuffered 2Rx8 DDR3 part draws nominal 1.5 V power and has no onboard cooling; any extra heat or noise comes from the system’s own fans, not the memory.

Does the N3000 site controller (1657) need a specific BIOS version or matching DIMM to accept this 204-pin upgrade?

The module is tested for the N3000 (1657) and follows JEDEC PC3-8500 specs; install it in an available 204-pin slot — no extra parts required.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.