OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)
- 4GB
- 260-Pin DDR4 Non-EC…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency for NCR POS Columbus 900 and P1235 systems
This OWC 8GB DDR3L SODIMM is built for the NCR POS Columbus 900, P1235 and 7745 systems. It delivers a single 8GB module rated at 1600MHz with CL11 latency. The 204-pin unbuffered design operates at 1.35V. JEDEC compliance ensures a warranty-safe upgrade for these point-of-sale platforms.
The module is non-ECC and unbuffered, so it will not satisfy hardware that requires error-correction or registered signalling. Buyers whose POS units demand higher-density DIMMs or a different pin count should look elsewhere. This part addresses only the specific Columbus 900, P1235 and 7745 compatibility listed.
The memory uses the 204-pin DDR3L SODIMM form factor, which is the single specification that determines physical and electrical fit. Only systems accepting this exact module type will recognise the upgrade. Verify the slot type before ordering.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS Columbus 900 NCR POS P1235 NCR POS (7745) |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The stick operates at the JEDEC low-voltage 1.35 V level, which reduces heat output compared with standard 1.5 V DDR3 and suits all-day operation in the Columbus 900 or P1235 chassis.
A single DDR3L 204-pin SO-DIMM socket is required; the Columbus 900 and P1235 POS (7745) platforms include this slot.
The module is non-ECC and unbuffered, matching the specification for the Columbus 900; OWC tests each stick to meet the OEM requirements for that platform.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?