OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)
- 4GB
- 260-Pin DDR4 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency for NCR POS Columbus 900 and P1235 systems
This OWC 8GB DDR3L SODIMM is built for the NCR POS Columbus 900, P1235 and 7745 systems. It delivers a single 8GB module rated at 1600MHz with CL11 latency. The 204-pin unbuffered design operates at 1.35V. JEDEC compliance ensures a warranty-safe upgrade for these point-of-sale platforms.
The module is non-ECC and unbuffered, so it will not satisfy hardware that requires error-correction or registered signalling. Buyers whose POS units demand higher-density DIMMs or a different pin count should look elsewhere. This part addresses only the specific Columbus 900, P1235 and 7745 compatibility listed.
The memory uses the 204-pin DDR3L SODIMM form factor, which is the single specification that determines physical and electrical fit. Only systems accepting this exact module type will recognise the upgrade. Verify the slot type before ordering.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS Columbus 900 NCR POS P1235 NCR POS (7745) |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The stick operates at the JEDEC low-voltage 1.35 V level, which reduces heat output compared with standard 1.5 V DDR3 and suits all-day operation in the Columbus 900 or P1235 chassis.
A single DDR3L 204-pin SO-DIMM socket is required; the Columbus 900 and P1235 POS (7745) platforms include this slot.
The module is non-ECC and unbuffered, matching the specification for the Columbus 900; OWC tests each stick to meet the OEM requirements for that platform.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม