OWC 4GB DDR4 2400 CL17 1Rx8 260-pin SODIMM for POS Kitchen Controller 5 (1925)
- 4GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
An 8 GB DDR3L SODIMM running at 1600 MHz with CL11 latency for NCR POS Columbus 900 and P1235 systems
This OWC 8GB DDR3L SODIMM is built for the NCR POS Columbus 900, P1235 and 7745 systems. It delivers a single 8GB module rated at 1600MHz with CL11 latency. The 204-pin unbuffered design operates at 1.35V. JEDEC compliance ensures a warranty-safe upgrade for these point-of-sale platforms.
The module is non-ECC and unbuffered, so it will not satisfy hardware that requires error-correction or registered signalling. Buyers whose POS units demand higher-density DIMMs or a different pin count should look elsewhere. This part addresses only the specific Columbus 900, P1235 and 7745 compatibility listed.
The memory uses the 204-pin DDR3L SODIMM form factor, which is the single specification that determines physical and electrical fit. Only systems accepting this exact module type will recognise the upgrade. Verify the slot type before ordering.
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R808GB |
| Capacity | 8GB |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR POS Columbus 900 NCR POS P1235 NCR POS (7745) |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The stick operates at the JEDEC low-voltage 1.35 V level, which reduces heat output compared with standard 1.5 V DDR3 and suits all-day operation in the Columbus 900 or P1235 chassis.
A single DDR3L 204-pin SO-DIMM socket is required; the Columbus 900 and P1235 POS (7745) platforms include this slot.
The module is non-ECC and unbuffered, matching the specification for the Columbus 900; OWC tests each stick to meet the OEM requirements for that platform.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟